EP-Replacement of SUMA 85iB Injection Blow Molding Machine
The EP ZQ80 is a full European-type injection blow molding machine in the 80-ton clamping class — one of the most capable injection blow molding machine platforms in this category, built for production facilities requiring higher injection capacity, larger mold platen dimensions, and greater structural performance than what 40-ton and 60-ton IBM platforms can provide. It operates on the same three-station rotary turntable principle as other European IBM machines — injection, blow moulding, and stripping complete in continuous sequence — and follows the operational format that SUMA 85iB users will find directly recognisable, making the ZQ80 injection blow molding machine an appropriate evaluation target for facilities assessing alternatives to that equipment.
The ZQ80 injection blow molding machine’s clamping force of 800 KN is notably higher than the SUMA 85iB’s reference injection clamping force of 720 KN — a difference of roughly 11% that provides additional mechanical margin for complex multi-cavity tooling and demanding container geometries. Equally significant is the ZQ80’s screw diameter specification of 55 mm, which delivers a single fixed injection weight of 466 g — a figure that sits between the SUMA 85iB’s reference range of 333 g and 480 g, offering a well-centred injection capacity for the mid-to-large container formats this machine class is typically used to produce. The 800×400 mm mold platen is larger than the SUMA 85iB reference of 700×400 mm, allowing toolmakers greater flexibility in cavity layout for multi-cavity high-output tooling configurations.
Injection Blow Molding Machine — European Type / 80-Ton Class
EP-Replacement of SUMA 85iB Injection Blow Molding Machine – ZQ80
A high-tonnage European-type injection blow molding machine developed as a compatible equipment alternative for operations currently running or specifying the SUMA 85iB. SUMA and 85iB are referenced exclusively for customer selection assistance — this page does not represent or sell SUMA products of any kind.
Brand Reference Notice: SUMA and the model number 85iB are cited on this page solely to assist customers in identifying a compatible replacement. We do not manufacture, distribute, or represent SUMA products. All technical specifications listed below describe the EP ZQ80 injection blow molding machine only.
EP ZQ80 Injection Blow Molding Machine – Full Technical Specifications
| System | Item | Unidade | ZQ80 |
|---|---|---|---|
| Injection System | Diâmetro do parafuso | mm | 55 |
| Screw L/D | % | 22:1 | |
| Injection Weight | g | 466 | |
| Potência de aquecimento | KW | 18 | |
| Number of Barrel Zones | — | 3+N | |
| Injection Stroke | mm | 200 | |
| Clamping System | Clamping Force of Injection | KN | 800 |
| Opening Stroke for Injection | mm | 175 | |
| Clamping Force of Blowing | KN | 120 | |
| Opening Stroke for Blowing | mm | 175 | |
| Lifting Height of Rotary Table | mm | 80 | |
| Mould | Max. Platen Size (L×W) | mm | 800 × 400 |
| Mold Thickness | mm | 280 | |
| Max. Dia. of Bottle | mm | 160 | |
| Max. Bottle Height | mm | 300 | |
| Suitable Bottle Capacity | ml | 1 – 5000 | |
| Stripping Stroke | mm | 270 | |
| Hydraulic System | Hydraulic Pressure | MPa | 14 |
| Potência do motor | KW | 30 / 37 | |
| Dry Cycle | s | 5 | |
| Total Power | KW | 55 | |
| Operating Power Efficiency | % | 52 – 70 | |
| Others | Min. Air Pressure (Compressed Air) | MPa | 0.7 – 1.2 |
| Compressed Air Capacity | m³/min | 1.0 | |
| Water Flowage | m³/h | 4 | |
| Pressão da água de refrigeração | MPa | 0.3 – 0.4 | |
| Machine Dimension (L×W×H) | M | 4.5 × 1.6 × 2 | |
| Net Weight | Ton | 7 |
EP ZQ80 vs. SUMA 85iB — Key Parameter Comparison
The comparison below is intended to help SUMA 85iB operators assess whether the EP ZQ80 injection blow molding machine is a viable compatible replacement. SUMA 85iB reference data is included for selection assistance only — no SUMA products are distributed or represented on this page.
| Parâmetro | EP ZQ80 | SUMA 85iB (Ref.) |
|---|---|---|
| Clamping Force | 80 T | 85 T |
| Força de fechamento da injeção | 800 KN | 720 KN |
| Diâmetro do parafuso | 55 mm | 50 / 60 mm |
| Injection Weight | 466 g | 333 / 480 g |
| Max. Platen Size (L×W) | 800 × 400 mm | 700 × 400 mm |
| Machine Dimension (L×W×H) | 4.5 × 1.6 × 2 M | 4.5 × 2 × 2.6 M |
| Bottle Capacity Range | 1 – 5000 ml | Reference data |
| Net Weight | 7 T | Reference data |
Structural Advantages of the EP ZQ80 Injection Blow Molding Machine and Why It Outperforms Conventional IBM Designs
Full European Structure — 80T Class
The ZQ80 injection blow molding machine adopts a complete European-type horizontal turntable layout, providing a proven injection blow molding machine architecture for demanding production environments. Its clamping force is engineered to be 20–30% higher than the industry class average for 80-ton IBM machines, giving the machine significantly more structural margin for complex preform geometries and higher cavity count tooling than conventional machines at this tonnage.
800 KN Injection Clamping Force
At 800 KN injection clamping force, the ZQ80 injection blow molding machine exceeds the SUMA 85iB's reference clamping force of 720 KN. This additional holding force is relevant for large cavity injection molds and preform designs with tight flash margins, where even modest clamping force deficits produce consistent flash defects that slow production and increase reject rates.
Energy-Saving Pressurised Clamping
The ZQ80's unique pressurised clamping design uses a booster cylinder that only engages during the clamping hold phase — it does not participate in mold open or close movement. This reduces overall energy consumption by 10–20% versus conventional European IBM machine designs at equivalent tonnage, directly lowering the per-unit electricity cost for Colombian production facilities running multi-shift operations.
Large Platen: 800 × 400 mm
The ZQ80 injection blow molding machine's 800×400 mm maximum platen size exceeds the SUMA 85iB reference of 700×400 mm. The larger platen area provides toolmakers more space for cavity layout in multi-cavity configurations — a directly useful advantage for high-volume personal care and food container production where maximising cavities per cycle is a primary output lever.
Compact 4.5 × 1.6 × 2 M Footprint
Despite its 80-ton class capability, the ZQ80 injection blow molding machine occupies a footprint of 4.5×1.6×2 M — considerably more compact than the SUMA 85iB reference dimension of 4.5×2×2.6 M. The reduced width and height make the ZQ80 easier to install in standard production halls in Colombia without requiring extended crane height clearance or unusual floor layout accommodations.
Servo Turntable Rotation
Standard servo motor rotation of the three-station turntable provides accurate positioning and repeatable cycle timing across all production shifts. The servo drive architecture reduces indexing variation between stations, improving preform-to-blow alignment and contributing to consistent wall thickness distribution across high-cavity production runs of personal care, pharmaceutical, and food containers.
Application Scenarios for the EP ZQ80 Injection Blow Molding Machine
The ZQ80 injection blow molding machine's extended container range (1–5000 ml), larger platen, and 800 KN injection clamping force make it suitable for producing a wider range of container formats than lower-tonnage IBM platforms. Below are the primary application categories where the ZQ80 adds distinct value for producers in Colombia and export markets.
Large-Format Personal Care
The ZQ80 injection blow molding machine covers the 500 ml to 2,000 ml personal care container range — family-size shampoo, body wash, conditioner, and lotion bottles — where the ZQ40 and ZQ60 platforms reach their practical capacity ceiling. Colombia's personal care market has been shifting toward larger retail pack formats as consumer purchasing patterns evolve, and the ZQ80's extended container height of 300 mm and diameter of 160 mm accommodate these larger personal care formats with the neck finish precision that high-speed filling lines require.
Institutional & Foodservice Containers
Institutional cleaning products, foodservice sauces, and bulk condiment packaging in the 1,000 ml to 5,000 ml range represent a specific and growing segment of Colombian plastic container demand where the ZQ80 injection blow molding machine offers an appropriate production platform. The machine's 466 g injection weight and 800 KN clamping force support the heavier preform geometries needed for these large-format PP and HDPE containers, producing the structural wall distribution that institutional packing lines and bulk food distributors require.
Mid-Size Pharmaceutical Packaging
The ZQ80 injection blow molding machine extends IBM pharmaceutical container production into the 250 ml to 1,000 ml range — IV fluid bottles, large-volume oral liquid containers, and hospital-use packaging formats — where dimensional control and neck finish precision remain essential for INVIMA-regulated pharmaceutical environments in Colombia. The machine's servo turntable provides consistent preform indexing that helps maintain cavity-to-cavity dimensional uniformity across extended pharmaceutical production campaigns.
Agrochemical Bulk Containers
PP containers in the 1,000 ml to 5,000 ml range for concentrated herbicide, fungicide, and agricultural adjuvant products are a high-demand category across Colombia's agricultural sector — one of the country's primary industries. The ZQ80 injection blow molding machine's 800 KN injection clamping force and large platen size allow multi-cavity tooling for these larger agrochemical container formats, with the PP ESCR performance and neck finish consistency that UN-compatible dangerous goods containers require for export and domestic distribution.
Automotive & Industrial Fluid Containers
Engine oil bottles, coolant containers, and automotive maintenance product packaging in 1,000 ml to 5,000 ml formats represent consistent IBM production demand across the Colombian and Latin American automotive aftermarket. The ZQ80 injection blow molding machine produces PET and PP containers for these applications with the structural stacking performance, label panel consistency, and tamper-evident neck finish that automotive fluid brand owners and institutional industrial product distributors specify for their container packaging programmes.
Household Cleaning — Large Format
Floor care, laundry, and multipurpose cleaning products in family and institutional pack sizes (750 ml to 2,000 ml) continue to grow in volume across Colombian household and commercial cleaning distribution channels. The ZQ80 injection blow molding machine's PP processing capability and large platen produce surfactant-resistant containers with trigger-pump and dispensing cap neck finishes suited to the closure types common in this product category across the Andean market region.
Global Compliance Context for Large-Format Injection Blow Molding Machine Production in Colombia and Export Markets
Large-format containers produced on the ZQ80 injection blow molding machine are subject to a range of national and international compliance requirements. Any injection blow molding machine producing food, pharmaceutical, or agrochemical containers for international markets must address these frameworks. depending on the product category and target market. Operators in Colombia and producers exporting to international markets need to factor regulatory compliance into resin selection, closure specification, and container design from the outset of the tooling project.
| Market / Jurisdiction | Key Regulation | Relevance to ZQ80 IBM Container Production |
|---|---|---|
| Colombia (INVIMA) | Resolución 683/2012; INVIMA food and pharmaceutical packaging material regulations | PP and HDPE containers from the ZQ80 injection blow molding machine for pharmaceutical and food contact use in Colombia must comply with INVIMA material compatibility requirements; pharmaceutical-grade resin documentation required for INVIMA-registered product packaging |
| União Europeia | EU Regulation 10/2011; REACH (EC) 1907/2006; EU Packaging and Packaging Waste Regulation (PPWR) 2024 | Food and pharmaceutical containers exported to the EU must use substances listed in EU Regulation 10/2011; REACH restricts SVHC substances in plastics including packaging materials; PPWR mandates recyclable mono-material design — relevant for Colombian producers with EU export exposure |
| United States | FDA 21 CFR 177.1520 (PP); 21 CFR 177.1630 (PET); CPSC 16 CFR 1700 | Large-format food and pharmaceutical containers for the US market require FDA-compliant resin documentation; CPSC child-resistant closure requirements depend on precise IBM neck finish tolerances that the ZQ80 injection blow molding machine process provides |
| International Transport (UN/ADR/IMDG) | UN Model Regulations (Orange Book); ADR (European road transport); IMDG (sea freight) | Large PP containers for agrochemical and industrial chemical transport require UN 3H1/3H2 certification; the ZQ80 injection blow molding machine's 800 KN clamping and consistent wall distribution support drop and hydraulic pressure test performance for UN type approval |
| Brazil (ANVISA) | ANVISA RDC 498/2021; NBR 13853 (agrochemical containers) | Colombian producers exporting large-format plastic containers to Brazil require ANVISA food contact documentation; NBR 13853 specifies structural and triple-rinsability standards for agrochemical containers supplied to the Brazilian market |
| Germany | BfR Recommendation XV (PP food contact); Verpackungsgesetz (VerpackG); GGVSEB | BfR Recommendation XV requires specific additive documentation for PP food contact applications in Germany; VerpackG EPR levies reward recyclable mono-material container designs; GGVSEB implements ADR for road transport of dangerous goods |
| India (FSSAI/CIB) | FSSAI Packaging Regulations 2018; IS 12252 (PET food contact); CIB agrochemical container standards | Relevant for Colombian producers managing export production for multinational FMCG brands; CIB specifies container requirements for registered pesticide products including PP material and child-resistant closure specifications |
How to Select the Right Injection Blow Molding Machine for Large-Format Container Production in Colombia
The ZQ80 injection blow molding machine is appropriate for production operations where container volume requirements, platen size needs, or injection weight demands exceed what 40-ton and 60-ton European IBM platforms can reliably deliver. The following framework helps production engineers in Colombia and Latin America determine whether the ZQ80 injection blow molding machine is the right platform for their specific programme.
Container Volume and Format
The ZQ80 injection blow molding machine covers 1 ml to 5,000 ml — the widest range injection blow molding machine in the European IBM series covered in this product family. If your target container range includes formats above 2,000 ml or bottles requiring a body diameter above 120 mm (up to 160 mm on the ZQ80), this is the appropriate machine class to specify. Confirm bottle height against the ZQ80's 300 mm maximum before finalising tooling design.
Injection Weight Requirement
At 466 g injection weight with a 55 mm screw diameter, the ZQ80 injection blow molding machine handles preforms, the ZQ80 injection blow molding machine handles preforms up to approximately 460–470 g. Larger-body PP or HDPE containers with wall specifications that produce preforms above this weight will require a higher-tonnage injection blow molding machine. For preforms in the 200–450 g range — which covers the majority of 500 ml to 3,000 ml container formats — the ZQ80 is well suited without compromise.
Platen Size and Cavity Count
The ZQ80's 800×400 mm platen is the largest in the ZQ series covered here, accommodating toolsets for larger container formats or higher cavity count configurations than the ZQ60's 600×390 mm platen. If your tooling specification requires a cavity layout that exceeds the ZQ60 platen, the ZQ80 injection blow molding machine is the logical next platform. Tooling from SUMA 85iB machines with 700×400 mm platens can typically be evaluated for adaptation against the ZQ80's larger platen specification.
Energy and Operating Cost Modelling
The ZQ80 injection blow molding machine's total power of 55 KW and 10–20% energy saving from the pressurised clamping design should be modelled against your current energy cost baseline. For Colombian facilities operating at industrial tariffs across two or three shifts producing large containers with long cycle times, the energy cost differential between the ZQ80 and a conventional IBM machine of equivalent class accumulates meaningfully over a multi-year operational horizon.
Existing SUMA 85iB Tooling Compatibility
The ZQ80's 800×400 mm platen is larger than the SUMA 85iB's 700×400 mm reference, which means existing SUMA 85iB tooling will require back plate adaptation to utilise the full ZQ80 platen area. The actual injection core pin dimensions and blow cavity geometry are typically compatible for adaptation. Contact our technical team with SUMA 85iB mold drawings for a formal compatibility assessment before committing to a machine order.
Neck Finish and Closure Integration
Large-format containers typically use screw caps, snap-on closures, or pump trigger systems that require specific neck finish tolerances for consistent torque and seal performance. The ZQ80 injection blow molding machine forms the container neck in the injection station under full cavity control, delivering tolerance of ±0.15–0.2 mm that extrusion blow moulding at this container scale cannot match — a genuine technical advantage for large containers where cap performance at the filling line directly affects production efficiency.
Sobre nós
With more than twenty years of engineering and manufacturing experience in the injection blow molding machine sector, specialising in European-type injection blow molding machine design, our team produces a comprehensive range of European-type IBM machines covering the 40-ton, 60-ton, and 80-ton classes as well as a catalogue of replacement models designed as compatible alternatives for customers operating IBM equipment from established international brands. Our production facility exceeds 20,000 square metres and maintains a fully integrated supply chain from machine assembly through to mould tooling fabrication and after-sales technical support for clients globally.
Our injection blow molding machines — including European-type injection blow molding machine models in the 80-ton class — are in operation across pharmaceutical, personal care, food packaging, agrochemical, and industrial liquid container production in Colombia, across Latin America, and in markets spanning Southeast Asia, the Middle East, South Asia, and Europe. We understand what large-format IBM operations in Colombia require — from INVIMA pharmaceutical packaging documentation through to UN transport certification support for agrochemical container production. Whether you are establishing new injection blow molding machine capacity, replacing aging SUMA IBM equipment, or expanding an existing European injection blow molding machine production line, our technical team provides full support from specification through to machine commissioning and production training at your facility.
Oficina
Compatible Peripheral Equipment for the ZQ80 Injection Blow Molding Machine Production Line
A ZQ80 injection blow molding machine production line, like any injection blow molding machine at this scale, requires matched auxiliary equipment to reach its full efficiency potential. We supply or recommend the following system-compatible components as part of a comprehensive one-stop procurement solution:
Oil-Free Air Compressor
The ZQ80 injection blow molding machine requires 1.0 m³/min compressed air at 0.7–1.2 MPa — a higher air volume demand than the ZQ40 or ZQ60 due to the larger blow cavity volumes involved. For pharmaceutical and food container production, oil-free compressor technology is mandatory to prevent hydrocarbon contamination of the bottle interior, which would constitute a food contact compliance failure under INVIMA, FDA 21 CFR, and EU Regulation 10/2011. Our oil-free compressor range includes configurations sized to the ZQ80's specific air volume and pressure requirements, ensuring clean blow air across the machine's full 1 ml to 5,000 ml container production range.
Controlador de temperatura do molde
Large-format IBM molds carry more thermal mass than small-format tooling, making mold temperature stability more critical and more difficult to maintain without dedicated temperature control equipment. Our mold temperature controllers are matched to the ZQ80 injection blow molding machine's cooling water specification (0.3–0.4 MPa, 4 m³/h) and support the cavity temperature uniformity needed for consistent wall thickness and label panel geometry in large personal care, institutional, and agrochemical container production. Stable mold temperature also reduces cycle-to-cycle dimensional variation, which is particularly important when producing large containers that are subject to stacking load tests or UN drop certification.
Bottle Visual Inspection Machine
Automated bottle visual inspection systems placed downstream of the ZQ80 injection blow molding machine detect dimensional non-conformances, wall defects, contamination, and neck finish irregularities on large-format containers before they reach filling operations. For INVIMA-compliant pharmaceutical packaging in Colombia and for UN-certified agrochemical containers, per-batch traceability records from automated inspection support the quality management documentation that regulatory frameworks require. Our inspection systems are configured to accommodate the ZQ80's container range — up to 160 mm diameter and 300 mm bottle height — across the machine's full production capability.
Evaluating a Replacement for Your SUMA 85iB Injection Blow Molding Machine?
Our technical team provides tooling compatibility assessments, production capacity modelling, and personalised quotations for the EP ZQ80 injection blow molding machine for facilities in Colombia and international markets. Submit your SUMA 85iB mold drawings and container specifications to begin the evaluation.
Frequently Asked Questions — EP ZQ80 Injection Blow Molding Machine
What is the maximum bottle size the EP ZQ80 injection blow molding machine can produce for large-format personal care packaging in Colombia?
The ZQ80 injection blow molding machine produces containers up to 160 mm in body diameter and 300 mm in height, with a suitable bottle capacity range of 1 ml to 5,000 ml. For large-format personal care production in Colombia — family-size shampoo, conditioner, body lotion, and similar products — this dimension envelope covers the 750 ml to 2,000 ml formats that represent the primary growth range in the Colombian personal care retail market. Confirm your specific bottle diameter and height against these maximums before tooling design begins.
How does the EP ZQ80 injection blow molding machine injection clamping force compare to the SUMA 85iB and what does the difference mean for tooling performance?
The ZQ80 injection blow molding machine provides 800 KN injection clamping force, which is approximately 11% higher than the SUMA 85iB's reference value of 720 KN. In practical terms, this additional clamping force reduces the risk of mold flash on complex multi-cavity tooling or when processing resins with higher injection pressure requirements. For toolmakers designing new cavitation for the ZQ80, the higher clamping force margin also provides more flexibility in runner system design and gate sizing without compromising flash performance at the parting line.
Which resins does the EP ZQ80 European injection blow molding machine process for large-format food and agrochemical containers in Colombia?
The ZQ80 injection blow molding machine processes PP (polypropylene) and HDPE (high-density polyethylene) as its primary resins, which cover the dominant material requirements for large-format food, agrochemical, and institutional container production in Colombia. PP is the standard choice for agrochemical containers and food contact packaging due to its chemical resistance and INVIMA compliance pathway; HDPE for personal care and household cleaning products. PET processing for large clear containers is available with appropriate barrel configuration. All resins must carry food-grade documentation where food or pharmaceutical contact is involved.
Can existing SUMA 85iB tooling be adapted to fit the EP ZQ80 injection blow molding machine given the different platen dimensions?
The ZQ80 injection blow molding machine's platen is 800×400 mm versus the SUMA 85iB reference of 700×400 mm — meaning the ZQ80 platen is 100 mm longer in the L dimension. Existing SUMA 85iB tooling in the 700 mm length range can be adapted to the ZQ80 by adding extended back plates to fill the additional platen length. The injection core pins and blow cavity inserts are typically compatible for reuse, and mold thickness adaptation (ZQ80: 280 mm mold thickness specification) should also be verified. Our technical team can assess your specific SUMA 85iB toolset against ZQ80 requirements from your mold technical drawings.
What INVIMA pharmaceutical packaging compliance requirements apply to large-format containers produced on the ZQ80 injection blow molding machine in Colombia?
Large-format pharmaceutical containers (250 ml to 1,000 ml) produced on the ZQ80 injection blow molding machine for the Colombian market must comply with INVIMA's pharmaceutical packaging regulations under Resolución 683/2012 and relevant product-specific INVIMA registration requirements. The key practical requirements are: use of pharmaceutical-grade PP or HDPE resin with migration test documentation from the resin supplier; production under documented GMP-consistent conditions; and batch records identifying the resin lot and production parameters for each pharmaceutical product run. The ZQ80's process control architecture supports this documentation through its repeatable cycle parameter management.
Where can a packaging company in Colombia get a quotation for the EP ZQ80 injection blow molding machine for large-format agrochemical container production?
To receive a quotation for the ZQ80 injection blow molding machine for agrochemical container production in Colombia or the Andean region, prepare the following: target container volume and format (dimensions, neck standard, closure type), annual production volume in units per year, PP resin grade and MFI, required UN certification packing group if applicable, and facility electrical supply capacity and floor space dimensions. Submit these parameters via the product detail page or contact form, and our technical sales team will respond with a machine proposal, tooling recommendation, and logistics cost estimate within two business days.
How does the ZQ80 industrial injection blow molding machine compare to extrusion blow moulding for large-format HDPE or PP containers in the 2-litre to 5-litre range?
Extrusion blow moulding (EBM) is generally preferred for large HDPE containers above 5 litres and for containers requiring integrated handles — geometries that IBM tooling cannot readily accommodate. For the 1-litre to 5-litre range in PP or HDPE without handles, the ZQ80 injection blow molding machine offers neck finish precision that extrusion blow moulding cannot match at this injection blow molding machine container scale at this scale, producing a neck formed in the injection cavity with ±0.15–0.2 mm dimensional tolerance rather than the pinched-off EBM neck that may require secondary trimming. For agrochemical containers requiring precise UN hydraulic pressure test seal performance, this IBM neck finish advantage is a direct functional benefit that reduces test failure rates.
What after-sales technical support and spare parts availability can Colombian customers expect when purchasing the EP ZQ80 injection blow molding machine?
Our after-sales support for the ZQ80 injection blow molding machine in Colombia — as with every injection blow molding machine we supply — includes: on-site commissioning service with operator training, a first-year spare parts kit covering key consumable components (seals, heating bands, screw tip and check valve), remote video call technical support for troubleshooting, and an online spare parts order system for ongoing replenishment. The ZQ80's hydraulic system uses internationally sourced Parker valves and cylinders available locally through Colombian industrial distributors and directly from our logistics team with 7–14 day air freight delivery. PLC and servo components are from Inovance and equivalent recognised brands with local support networks in Colombia.
What is the best injection blow molding machine for producing 5-litre PP agrochemical containers that need UN 3H1 certification for export from Colombia?
For 5-litre PP agrochemical containers requiring UN 3H1 certification for export from Colombia, the ZQ80 injection blow molding machine is the appropriate platform in the European IBM series. Its 800 KN injection clamping force, 466 g injection weight, and 5,000 ml container capacity ceiling cover this format's production requirements. UN 3H1 certification requires drop, stacking, hydraulic pressure, and vibration testing conducted by an accredited packaging test laboratory on the specific container-resin combination. Our technical team supports the certification process from mold design review through to test sample preparation, working with Colombian and international certification laboratories familiar with the Andean region's export packaging requirements.
How does the EP ZQ80 injection blow molding machine's compact footprint compared to SUMA 85iB help production facilities in Colombia optimise factory floor space?
The ZQ80 injection blow molding machine's dimensions of 4.5×1.6×2 M (L×W×H) compare favourably against the SUMA 85iB's reference dimension of 4.5×2×2.6 M. The width reduction from 2 M to 1.6 M and height reduction from 2.6 M to 2 M are both practically significant for Colombian production facilities where multi-machine layouts in standard industrial halls impose real space constraints. The lower height in particular eliminates requirements for overhead crane clearance modifications in buildings with standard 3–4 m ceilings — a common constraint in Colombian manufacturing facilities converting from other packaging technologies to IBM production.
Editor: PXY
