Replacement of Brands
Injection Blow Molding Equipment
A direct, spec-for-spec alternative to leading global injection blow molding machine manufacturers — built with European-style architecture, higher clamping force, and lower energy consumption than comparable models in the market.
Same tonnage class
Each model corresponds to a Jomar, SUMA, or Bloma equivalent by injection clamping force — 40 T through 135 T — so you are not re-qualifying a new size, only swapping the platform.
Compatible bottle range
Mold platen sizes are engineered to accept standard IBM mold footprints used across industry, covering bottles from 1 ml pharmaceutical vials to 2,000 ml consumer containers.
Superior clamping architecture
Full European-style pressurized clamping structure: the booster cylinder is inactive during open/close cycles, cutting wear and reducing cycle energy by 10–20% versus competitors at the same tonnage.
Whole-line supply
Machines ship as a complete turnkey system including molds, auxiliary equipment, chiller, air compressor, packing machine, and vision inspection — reducing integration time and single-source accountability.
Select By Alternative Brands
| Spec | Our Machine | SUMA equivalent |
|---|---|---|
| Clamping class | 40 T | 40 iB |
| इंजेक्शन क्लैम्पिंग बल | 400 केएन | 386 KN |
| Injection weight | 190 / 260 g | 169 g |
| पेंच का व्यास | 40 / 45 mm | 40 mm |
| Mold platen size | 480 × 340 mm | 470 × 350 mm |
| Bottle volume range | 1–1500 ml | — |
| Clamping class | Our model | SUMA model | Our clamp force | SUMA clamp force |
|---|---|---|---|---|
| 40 T | EP-ZQ40 | 40 iB | 400 केएन | 386 KN |
| 60 T | EP-ZQ60 | 65 iB | 600 KN | 580 KN |
| 80 T | EP-ZQ80 | 85 iB | 800 KN | 720 KN |
| 110 T | EP-ZQ110 | 135 iB | 1100 KN | 1200 KN |
| 135 T | EP-ZQ135 | 175 iB | 1350 KN | 1600 KN |
Ready to specify a replacement?
Tell us your current machine model, bottle specification, and target output. We'll match the right equivalent and provide a full technical comparison within 48 hours.
Browse All IBM MachinesBrand Specification Comparison
The following data is drawn directly from published manufacturer specifications. Each pairing compares equivalent tonnage classes across key engineering parameters. Values reflect the stated figures; where a manufacturer publishes a range, the midpoint or maximum is used for bar scaling.
EP Series — Notable Points at 40T
- ·Injection weight up to 260 g (vs. 180 g)
- ·Injection clamping force 400 KN (vs. 340 KN)
- ·Larger screw diameter option (45 mm)
- ·Compact footprint: 8.6 m³ floor volume
- ·Dry cycle 3.5 s standard
Jomar IBM40 — Notable Points
- ·Deeper mold platen depth (508 mm) suits taller mold stacks
- ·Established global service network
- ·Long market presence in North American pharmaceutical sector
* All specifications sourced from published manufacturer datasheets and internal competitive analysis documentation. Bar widths are scaled relative to the higher value within each paired comparison. Where a manufacturer lists a range, the maximum value is used for scaling. Specifications subject to change; verify with manufacturer before procurement decisions.
How to choose the right replacement model
If you know your current machine’s brand and model number, match by clamping tonnage class. If you are specifying from scratch, start with your target bottle volume and cavity count.
By clamping tonnage
- →Identify your current machine's tonnage class (e.g. IBM 40 T, 40iB, IBM45)
- →Cross-reference in the tables above to find the equivalent model
- →Check mold platen size for compatibility with your existing tooling
- →Confirm bottle height and diameter fit within max mold dimensions
By bottle volume
- →Smaller volumes (1–100 ml): 40 T or 60 T class with high cavity count
- →Medium volumes (100–500 ml): 60 T or 80 T gives the best yield balance
- →Large volumes (500–2000 ml): 80 T through 135 T; consider cavity count vs. cycle time
- →All models handle 1–2000 ml; tonnage controls cavities per shot
By material
- →HDPE / LDPE / PP: any model — standard pharma and daily chemical packaging
- →PS (high-transparency, lactic acid bacteria): all models; check screw L/D 22:1
- →ABS / PCTG / EVA: confirm with technical team for screw configuration
- →Eco corn-based materials: verified compatible across the full range
By industry
- →Pharmaceutical: 40 T–80 T, small cavities, precision neck finish
- →Cosmetics / personal care: 60 T–110 T, wide-mouth jar capability
- →Food and beverage: 80 T–135 T for larger bottles and higher throughput
- →Chemical packaging: 80 T–135 T; thicker wall requirements supported
Mold Characteristics
- The activity designed cavity and neck of injection mold and special designed oil way which can be changed conveniently to ensure the tube billet size, the stable temperature.
- Injection mold material adopt imported $136 steel alloy or 4Cr13 stainless steel. The high strength steel increase the service life.
- The optimized hot runner system and bottle embryo to ensure the gram weight deviation and wall thickness deviation minimization. The special structure of mandrel will keep the fast molding cycle and good core cooling effect.
- The mouth and thread are accurate in size and 100% sealed.
- There are no burrs and non‑waste on the mouth and bottom of the bottle.
- The product size, weight, mold line and bottle thickness are consistent.
