{"id":758,"date":"2026-07-28T07:37:44","date_gmt":"2026-07-28T07:37:44","guid":{"rendered":"https:\/\/onestepblowmachine.com\/?post_type=product&p=758"},"modified":"2026-07-28T07:37:44","modified_gmt":"2026-07-28T07:37:44","slug":"ep-zq80-injection-blow-molding-machine-replacement-of-bloma-ibm85","status":"publish","type":"product","link":"https:\/\/onestepblowmachine.com\/ur\/product\/ep-zq80-injection-blow-molding-machine-replacement-of-bloma-ibm85\/","title":{"rendered":"EP-ZQ80 Injection Blow Molding Machine Replacement of Bloma IBM85"},"content":{"rendered":"
\n
\n

European-Style Industrial Injection Blow Molding Machine \u2014 80T Class<\/p>\n

EP-ZQ80 Injection Blow Molding Machine
\nReplacement of Bloma IBM85<\/span><\/h1>\n

Full European-style structure \u00b7 800 KN Injection Clamping \u00b7 55 KW Total Power \u00b7 Up to 20 Cavities at 10 ml \u00b7 Machine Size 4.5\u00d71.6\u00d72 M<\/p>\n<\/div>\n

<\/p>\n

\n

Brand Reference Notice:<\/strong> Bloma is referenced here solely to assist buyers in identifying a compatible alternative within the same clamping tonnage class. This page does not imply commercial affiliation with, or representation of, Bloma or any of its products. The EP-ZQ80 is an independently designed and manufactured injection blow molding machine. We do not assert any negative position about Bloma equipment and encourage buyers to evaluate all available options using objective technical criteria.<\/p>\n<\/div>\n

<\/p>\n

\n
\n
\n

\"onestepblowmachine-EP-EuropeanEP-ZQ80 | Injection Blow Molding Machine (European) \u00b7 4.5\u00d71.6\u00d72 M \u00b7 10 Ton<\/p>\n<\/div>\n

\n

EP-ZQ80: High-Output European Injection Blow Molding Machine<\/h2>\n

The EP-ZQ80 is a high-output, upper-mid-class injection blow molding machine<\/strong> built on a full European-style mechanical platform, designed for manufacturers who need the cavitation depth and structural rigidity of a serious production machine without the scale and complexity of 100-ton-plus equipment. Operating at 800 KN injection clamping force and 120 KN blow clamping force, the ZQ80 maintains tight dimensional accuracy across up to 20 cavities at 10 ml on its 800\u00d7400 mm platen \u2014 a meaningful productivity step above 60-ton-class equipment. For container producers in Colombia and across Latin America who are evaluating the 80-ton IBM class, including those familiar with Bloma IBM85-category machines, the ZQ80’s engineering specifications are worth examining on objective technical terms.<\/p>\n

The machine covers a 1\u20132000 ml container range, with a 55 mm screw diameter, 22:1 L\/D ratio, and 466 g injection weight \u2014 substantially above the Bloma IBM85’s 310\/280 g capacity and providing significant headroom for demanding high-cavitation pharmaceutical and cosmetic applications. The 4+N barrel heating zone configuration with 18 KW heating power maintains uniform melt temperature across the full plastication zone, supporting HDPE, PP, PET, PVC, and TPE resins without dedicated barrel changeovers. For Colombian manufacturers producing pharmaceutical vials, personal care containers, food packaging, and industrial bottles, the ZQ80 covers all of these from a single platform.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

 <\/p>\n

\n

EP-ZQ80 Injection Blow Molding Machine Full Technical Specifications<\/h2>\n
\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
System \/ Category<\/th>\nInjection Blow Molding Machine Parameter<\/th>\n\u06cc\u0648\u0646\u0679<\/th>\nZQ80 Value<\/th>\n<\/tr>\n<\/thead>\n
Injection System<\/td>\n<\/tr>\n
<\/td>\n\u0633\u06a9\u0631\u0648 \u0642\u0637\u0631<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n55<\/td>\n<\/tr>\n
<\/td>\n\u0633\u06a9\u0631\u0648 L\/D \u062a\u0646\u0627\u0633\u0628<\/td>\n%<\/td>\n22:1<\/td>\n<\/tr>\n
<\/td>\nInjection Weight<\/td>\ng<\/td>\n466<\/td>\n<\/tr>\n
<\/td>\n\u062d\u0631\u0627\u0631\u062a\u06cc \u0637\u0627\u0642\u062a<\/td>\n\u06a9\u0644\u0648 \u0648\u0627\u0679<\/td>\n18<\/td>\n<\/tr>\n
<\/td>\nNumber of Barrel Zones<\/td>\n-<\/td>\n4+N<\/td>\n<\/tr>\n
<\/td>\nInjection Stroke<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n180<\/td>\n<\/tr>\n
Clamping System<\/td>\n<\/tr>\n
<\/td>\nClamping Force \u2014 Injection<\/td>\n\u06a9\u06d2 \u0627\u06cc\u0646<\/td>\n800<\/td>\n<\/tr>\n
<\/td>\nOpening Stroke \u2014 Injection<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n140<\/td>\n<\/tr>\n
<\/td>\nClamping Force \u2014 Blowing<\/td>\n\u06a9\u06d2 \u0627\u06cc\u0646<\/td>\n120<\/td>\n<\/tr>\n
<\/td>\nOpening Stroke \u2014 Blowing<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n140<\/td>\n<\/tr>\n
<\/td>\nLifting Height of Rotary Table<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n70<\/td>\n<\/tr>\n
Mould<\/td>\n<\/tr>\n
<\/td>\nMax. Platen Size (L \u00d7 W)<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n800 \u00d7 400<\/td>\n<\/tr>\n
<\/td>\nMold Thickness<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n280<\/td>\n<\/tr>\n
<\/td>\nMax. Bottle Diameter<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n120<\/td>\n<\/tr>\n
<\/td>\nMax. Bottle Height<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n220<\/td>\n<\/tr>\n
<\/td>\nSuitable Bottle Volume<\/td>\n\u0645\u0644\u06cc \u0644\u06cc\u0679\u0631<\/td>\n1 \u2013 2000<\/td>\n<\/tr>\n
<\/td>\nStripping Stroke<\/td>\n\u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n230<\/td>\n<\/tr>\n
Hydraulic System<\/td>\n<\/tr>\n
<\/td>\nHydraulic Pressure<\/td>\n\u0627\u06cc\u0645 \u067e\u06cc \u0627\u06d2<\/td>\n14<\/td>\n<\/tr>\n
<\/td>\n\u0645\u0648\u0679\u0631 \u067e\u0627\u0648\u0631<\/td>\n\u06a9\u0644\u0648 \u0648\u0627\u0679<\/td>\n18.5 + 18.5<\/td>\n<\/tr>\n
<\/td>\nDry Cycle Time<\/td>\ns<\/td>\n4<\/td>\n<\/tr>\n
<\/td>\nTotal Power<\/td>\n\u06a9\u0644\u0648 \u0648\u0627\u0679<\/td>\n55<\/td>\n<\/tr>\n
<\/td>\nOperating Power Efficiency<\/td>\n%<\/td>\n52 \u2013 70<\/td>\n<\/tr>\n
Other Parameters<\/td>\n<\/tr>\n
<\/td>\nMin. Air Pressure (Compressed Air)<\/td>\n\u0627\u06cc\u0645 \u067e\u06cc \u0627\u06d2<\/td>\n0.7 \u2013 1.2<\/td>\n<\/tr>\n
<\/td>\nCompressed Air Capacity<\/td>\nM\u00b3\/min<\/td>\n0.7<\/td>\n<\/tr>\n
<\/td>\nCooling Water Flow<\/td>\nM\u00b3\/h<\/td>\n4<\/td>\n<\/tr>\n
<\/td>\n\u06a9\u0648\u0644\u0646\u06af \u0648\u0627\u0679\u0631 \u067e\u0631\u06cc\u0634\u0631<\/td>\n\u0627\u06cc\u0645 \u067e\u06cc \u0627\u06d2<\/td>\n0.3 \u2013 0.4<\/td>\n<\/tr>\n
<\/td>\n\u0645\u0634\u06cc\u0646 \u06a9\u06d2 \u0637\u0648\u0644 \u0648 \u0639\u0631\u0636 (L \u00d7 W \u00d7 H)<\/td>\nM<\/td>\n4.5 \u00d7 1.6 \u00d7 2<\/td>\n<\/tr>\n
<\/td>\nNet Weight<\/td>\nTon<\/td>\n10<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

<\/p>\n

\n

ZQ80 Mold Cavitation Reference by Bottle Volume<\/h3>\n
\n\n\n\n\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n
Approx. Volume<\/th>\n10 ml<\/th>\n30 ml<\/th>\n60 ml<\/th>\n100 ml<\/th>\n250 ml<\/th>\n500 ml<\/th>\n1000 ml<\/th>\n<\/tr>\n<\/thead>\n
Max. Cavities<\/td>\n20<\/td>\n18<\/td>\n14<\/td>\n12<\/td>\n8<\/td>\n5\u20136<\/td>\n3\u20134<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n

Reference values only. Actual cavitation depends on container geometry and mold design. Consult our engineering team for your specific project.<\/p>\n<\/div>\n

<\/p>\n

\"Injection<\/div>\n

<\/p>\n

\n

EP-ZQ80 vs. Bloma IBM85 Injection Blow Molding Machine \u2014 Objective Parameter Comparison<\/h2>\n

Bloma referenced for selection guidance only. No commercial affiliation implied. Data presented for objective buyer assessment.<\/p>\n

\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Injection Blow Molding Machine Specification<\/th>\nEP-ZQ80 Injection Blow Molding Machine<\/th>\nBloma IBM85 (ref.)<\/th>\n<\/tr>\n<\/thead>\n
Clamping Force (Injection)<\/td>\n800 KN<\/td>\n700 KN<\/td>\n<\/tr>\n
Clamping Tonnage Category<\/td>\n80 T<\/td>\nIBM85 class<\/td>\n<\/tr>\n
\u0633\u06a9\u0631\u0648 \u0642\u0637\u0631<\/td>\n55 mm<\/td>\n50 \u0645\u0644\u06cc \u0645\u06cc\u0679\u0631<\/td>\n<\/tr>\n
Injection Weight<\/td>\n466 g<\/td>\n310 \/ 280 g<\/td>\n<\/tr>\n
Max. Platen Size (L \u00d7 W)<\/td>\n800 \u00d7 400 mm<\/td>\n620 \u00d7 430 mm<\/td>\n<\/tr>\n
\u0645\u0634\u06cc\u0646 \u06a9\u06d2 \u0637\u0648\u0644 \u0648 \u0639\u0631\u0636 (L \u00d7 W \u00d7 H)<\/td>\n4.5 \u00d7 1.6 \u00d7 2 M<\/td>\n620 \u00d7 430 \u00d7 2.55 M<\/td>\n<\/tr>\n
Total Power<\/td>\n55 KW<\/td>\nIBM85 class standard<\/td>\n<\/tr>\n
Energy Saving vs. Peers<\/td>\n20\u201330% lower<\/td>\nSingle-circuit standard<\/td>\n<\/tr>\n
Hydraulic Configuration<\/td>\nDouble System<\/td>\n\u0645\u0639\u06cc\u0627\u0631\u06cc<\/td>\n<\/tr>\n
Max. Cavities at 10 ml<\/td>\n20<\/td>\nIBM85 class range<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n
\n

Five Performance Advantages of the EP-ZQ80 Injection Blow Molding Machine<\/h2>\n

Each advantage below reflects a verified engineering specification or structural design characteristic of the ZQ80.<\/p>\n

\n
\n
\u25b6<\/div>\n

800 KN Injection Clamping \u2014 14% Above Bloma IBM85<\/h3>\n

The ZQ80 delivers 800 KN injection clamping force versus the Bloma IBM85’s 700 KN \u2014 a 14% structural advantage within the same 80-ton tonnage category. This additional clamping rigidity allows the ZQ80 to support wider molds, higher cavity counts, and more demanding mold geometries without risking flash or platen deflection at peak injection pressure. For producers of pharmaceutical vials in Colombia running 20-cavity 10 ml molds, this clamping advantage directly supports the cavity-to-cavity weight uniformity that pharmaceutical batch documentation and INVIMA quality compliance require.<\/p>\n<\/div>\n

\n
\u25b6<\/div>\n

466 g Injection Weight \u2014 Far Above IBM85’s 310\/280 g<\/h3>\n

The ZQ80’s 55 mm screw delivers 466 g injection weight \u2014 considerably above the Bloma IBM85’s 310\/280 g dual-shot capacity. This injection weight headroom allows the ZQ80 to service high-cavitation molds with confidence, produce larger containers in the 500\u20132000 ml range without shot-weight constraints, and process higher-density resins without compromising preform fill quality. For Latin American plastic injection blow molding machine<\/strong> operators who run mixed container portfolios across pharmaceutical and industrial applications on a single platform, this injection weight flexibility is a practical commercial advantage.<\/p>\n<\/div>\n

\n
\u25b6<\/div>\n

Hydraulic Double System \u2014 20\u201330% Energy Saving<\/h3>\n

The ZQ80’s hydraulic double system keeps the booster clamping cylinder separate from the mold travel circuit. The booster engages only at full mold closure for lock-up, not during the opening and closing strokes \u2014 dramatically reducing average hydraulic power demand per cycle. Combined with 55 KW total installed power and an operating efficiency range of 52\u201370%, this architecture produces 20\u201330% lower energy consumption than single-circuit machines at equivalent clamping tonnage. For Colombian manufacturers running two or three shifts, this energy reduction is a real monthly utility cost difference \u2014 not a theoretical projection.<\/p>\n<\/div>\n

\n
\u25b6<\/div>\n

High-Precision Angle Divider \u2014 4-Second True Dry Cycle<\/h3>\n

The standard high-precision angle divider on the ZQ80 achieves simultaneous mold opening and turret lifting \u2014 not a sequential pair of separate hydraulic events. This single-motion compound actuation eliminates the dead time between mold open and turret index that adds 0.5\u20131.5 seconds per cycle on machines without this mechanism. At 20 cavities and sustained two-shift operation, even a one-second per cycle advantage compounded across annual production hours translates to a meaningful additional container output \u2014 a productivity gain that materializes every day without operator intervention or process adjustment.<\/p>\n<\/div>\n

\n
\u25b6<\/div>\n

Compact 2 M Height \u2014 Standard Building Compatible<\/h3>\n

At 4.5\u00d71.6\u00d72 M and 10 tons, the ZQ80 fits within standard Colombian industrial building clearances of 3\u20134 M without structural modifications. The Bloma IBM85 reference footprint of 620\u00d7430\u00d72.55 M is notably taller, requiring more clearance. The ZQ80’s 2 M height means technicians can access the machine top for maintenance without elevated platforms in many facility configurations. For Colombian manufacturers expanding within existing buildings \u2014 where overhead clearance is a fixed constraint \u2014 this dimensional difference has real practical significance during installation planning and ongoing maintenance operations.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Application Scenarios of Injection Blow Molding Machine<\/h2>\n

The ZQ80 industrial injection blow molding machine<\/strong> is suited to high-volume container production across pharmaceutical, personal care, food, and industrial applications where output rate, container precision, and energy efficiency all matter simultaneously.<\/p>\n

\n
\n

\ud83d\udc8a High-Volume Pharmaceutical Vials<\/h3>\n

At 20 cavities per cycle at 10 ml and 18 cavities at 30 ml, the ZQ80 is one of the most productive injection blow molding machines available for pharmaceutical vial production in this clamping class. The 800 KN injection clamping force maintains cavity-to-cavity weight uniformity across the full 800\u00d7400 mm platen \u2014 a structural requirement for pharmaceutical batch documentation and INVIMA compliance in Colombia. The sealed IBM process prevents airborne contamination between injection and blowing stages, supporting the sterility assurance levels required for pharmaceutical primary packaging. The 4+N barrel zones sustain melt temperature uniformity for pharmaceutical-grade HDPE and PP resins.<\/p>\n<\/div>\n

\n

\ud83e\uddf4 Personal Care & Cosmetic Packaging<\/h3>\n

With 18 cavities at 30 ml and 14 cavities at 60 ml, the ZQ80 produces personal care containers at competitive hourly output rates for cosmetic manufacturers targeting both domestic Colombian retail and Latin American export markets. Shampoo bottles, lotion dispensers, serum containers, and travel-size personal care packaging in the 30\u2013250 ml range represent the ZQ80’s commercial sweet spot. The servo rotation system ensures consistent container geometry and neck finish across all 18 cavities per cycle \u2014 important for cosmetic containers where closure compatibility and surface quality are customer-facing requirements that directly affect brand perception.<\/p>\n<\/div>\n

\n

\ud83e\udd5b Food & Beverage Packaging<\/h3>\n

Single-serve dairy containers, condiment packaging, cooking oil bottles, and flavored beverage bottles in the 100\u2013500 ml range are efficiently produced on the ZQ80’s 12\u20138 cavity configurations for these volumes. Food-contact containers produced on this injection blow molding machine must comply with Colombia’s ICONTEC NTC 4728 and INVIMA Decree 1575, as well as FDA 21 CFR and EU Regulation 10\/2011 for manufacturers whose containers enter export markets. The IBM process’s closed production sequence prevents contamination between injection and blowing \u2014 a hygiene advantage over open-parison alternatives relevant to food-grade packaging validation.<\/p>\n<\/div>\n

\n

\ud83c\udf3f Agrochemical Containers<\/h3>\n

Colombia’s substantial coffee, flower, and sugarcane agriculture generates consistent demand for pesticide, herbicide, and fertilizer containers that must satisfy ICA regulatory requirements and UN hazardous materials packaging certification. The ZQ80 processes chemical-grade HDPE reliably across its 466 g injection weight range, producing containers from 60 ml pesticide concentrate ampoules through 1,000 ml agricultural solution bottles. The 800 KN injection clamping force and 120 KN blow clamping maintain container wall uniformity in chemical-grade HDPE containers where wall thinning at critical geometry points creates leakage risk under transport conditions.<\/p>\n<\/div>\n

\n

\ud83c\udfed Household Chemicals & Industrial Fluids<\/h3>\n

Cleaning agents, disinfectants, automotive maintenance fluids, and industrial lubricants packaged in the 250\u20132000 ml range represent a substantial volume opportunity for Colombian container manufacturers. The ZQ80 produces 8 cavities at 250 ml and 3\u20134 cavities at 1,000 ml per cycle \u2014 productivity levels that justify in-house container production at major household chemical manufacturers in Bogot\u00e1, Medell\u00edn, and Cali. Vertical integration of container production on the ZQ80 reduces dependency on external IBM container suppliers, giving manufacturers direct control over container specifications, delivery schedules, and quality documentation.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\"Industrial<\/div>\n

<\/p>\n

\n

ZQ80 Machine Architecture \u2014 Engineering Principles<\/h2>\n
\n
\n

Full European Closed-Frame Structure<\/h3>\n

The ZQ80 Injection Blow Molding Machine’s structural frame follows European injection blow molding machine design conventions that route clamping loads through a closed perimeter frame rather than tie-bar tension. On a 800\u00d7400 mm platen carrying 20-cavity molds at 10 ml, the additional stiffness of a closed frame versus tie-bar designs is directly measurable in corner-cavity versus center-cavity weight variation. European closed-frame IBM machines maintain narrower weight variation across all cavities under production loading \u2014 which is why this structural approach has been standard in European IBM design for several decades and is explicitly referenced as 20\u201330% above industry average clamping performance in this machine’s published specifications.<\/p>\n<\/div>\n

\n

High-Precision Angle Divider<\/h3>\n

The angle divider mechanism on the ZQ80 executes mold opening and turret lifting simultaneously through a single mechanical cam actuation sequence. In IBM machines without this mechanism, these are sequential events \u2014 the mold opens, settles, then the turret begins to rise \u2014 adding measurable dead time per cycle. At 20 cavities running a 4-second dry cycle, even a 0.8-second dead-time reduction per cycle produces approximately 2,160 additional cycles per 24-hour shift. Multiplied by 20 cavities and across a full production year, this simultaneous motion design creates a container output advantage that compounds continuously without any process parameter change.<\/p>\n<\/div>\n

\n

Hydraulic Double System<\/h3>\n

The ZQ80’s hydraulic architecture separates the booster clamping circuit from the mold travel circuit. The booster \u2014 which delivers 800 KN at full lock-up \u2014 activates only at the moment of complete mold closure and releases before mold opening begins. The mold travel sequence operates on the lower-pressure mold travel circuit only. This means the dual 18.5+18.5 KW motor pair is driving the high-pressure booster circuit for only the injection dwell portion of each cycle, not the full sequence. The energy reduction relative to single-circuit machines \u2014 cited as 20\u201330% \u2014 results from this reduced average high-pressure pump demand across the full cycle.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Regulatory Environment for Injection Blow Molding Machines<\/h2>\n

Operators of injection blow molding machines and producers of IBM-manufactured containers must comply with overlapping national and international regulatory frameworks depending on product type, resin, and end market. The following overview covers the standards most directly relevant to ZQ80 operators in Colombia and their export markets.<\/p>\n

\n
\n

\ud83c\udde8\ud83c\uddf4 Colombia \u2014 INVIMA, ICONTEC & ICA<\/h3>\n

Pharmaceutical primary packaging produced on injection blow molding machines in Colombia must satisfy INVIMA Decree 677 and supplementary resolutions governing container materials, closure performance, and batch documentation. Food-contact plastic containers must comply with ICONTEC NTC 4728 and INVIMA Decree 1575. Agrochemical containers for the Colombian market fall under ICA supervision \u2014 requiring demonstrable closure integrity and chemical resistance. Colombia’s Law 2232 of 2022 on sustainable plastics and Decree 1076 of 2015 on environmental management impose recycling and waste management obligations on high-volume IBM container producers serving the Colombian domestic market.<\/p>\n<\/div>\n

\n

\ud83c\uddea\ud83c\uddfa European Union \u2014 Machinery Directive & Food Contact<\/h3>\n

EU Machinery Directive 2006\/42\/EC requires CE marking and documented conformity assessment for injection blow molding machines placed on the European market. EU Regulation 10\/2011 on plastic materials in food contact applies to containers produced for EU food markets. The ZQ80’s European-style closed-frame structure, hydraulic double system, and precision angle divider are engineered with these standards as structural and safety design references. Buyers targeting EU markets should verify CE documentation scope with their technical and legal advisors for their specific application.<\/p>\n<\/div>\n

\n

\ud83c\uddfa\ud83c\uddf8 USA \u2014 FDA 21 CFR & OSHA<\/h3>\n

For US market pharmaceutical packaging, FDA 21 CFR Parts 210 and 211 govern drug packaging material and process requirements. Food-contact containers for the US market must comply with FDA 21 CFR Parts 174\u2013186. Machine operators in US-facing facilities must follow OSHA 29 CFR 1910.147 lockout\/tagout requirements for maintenance on the ZQ80’s hydraulic systems. Medical device packaging destined for the US market must address FDA 21 CFR 820 (Quality System Regulation) and the applicable guidance from the FDA on container closure systems for sterile products where relevant.<\/p>\n<\/div>\n

\n

\ud83c\udf0e Andean Community & Latin American Trade<\/h3>\n

Within the Andean Community (Colombia, Peru, Ecuador, Bolivia), Decision 562 harmonizes packaging material regulations across member markets. MERCOSUR Resolution 56\/92 covers food-contact plastic materials for Brazilian and Argentine export markets. UN Orange Book recommendations on the Transport of Dangerous Goods govern hazardous materials container certification relevant to Colombian producers of agrochemical and chemical containers on the ZQ80. Understanding these overlapping frameworks helps Colombian IBM container producers structure product qualification to simultaneously satisfy domestic and multiple export market requirements.<\/p>\n<\/div>\n

\n

\ud83c\udf10 ISO \u2014 Quality, Energy & Environmental Management<\/h3>\n

ISO 9001 quality management and ISO 15378 pharmaceutical primary packaging quality systems are standard requirements for facilities operating injection blow molding machines in pharmaceutical supply chains. ISO 14001 environmental management and ISO 45001 occupational health and safety are increasingly required by global brand owners as supply chain sustainability conditions. The ZQ80’s 20\u201330% energy reduction versus category peers supports ISO 50001 energy management system baseline and target-setting for facilities in Colombia pursuing energy-related certification or corporate sustainability reporting commitments.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/div>\n

<\/p>\n

\n

Where Does the ZQ80 Injection Blow Molding Machine Fit in Your Production Strategy?<\/h2>\n

Understanding where the ZQ80 sits relative to other IBM platforms in our range helps buyers make more informed procurement decisions. The ZQ80 Injection Blow Molding Machine is positioned between the ZQ60 (600 KN, 14 cavities at 10 ml) and the ZQ110 (1100 KN, 24 cavities at 10 ml) \u2014 serving manufacturers who have outgrown 60-ton-class productivity but whose volume requirements do not yet justify 100-ton-plus capital investment and utility footprint.<\/p>\n

\n
\n

Growing Production Volume<\/h3>\n

For Colombian container manufacturers whose annual volume at a given size has grown beyond what a ZQ60 (14 cavities at 10 ml) can economically supply in available shift hours, the ZQ80’s 20-cavity capacity at 10 ml provides a 43% throughput increase on the same production floor area and utility footprint \u2014 without a proportional increase in capital cost. This is the typical upgrade driver for pharmaceutical producers expanding their vial production lines to supply growing domestic healthcare demand in Colombia.<\/p>\n<\/div>\n

\n

Larger Container Format Requirements<\/h3>\n

The ZQ80’s 466 g injection weight and 800\u00d7400 mm platen support container sizes up to 2,000 ml and cavitation at 1,000 ml (3\u20134 cavities) that falls outside what smaller IBM platforms can produce in their effective operating range. For Colombian industrial and household chemical manufacturers who need to add larger container formats to their existing IBM-based production operations, the ZQ80 provides this capability without the overhead of 100-ton-class equipment.<\/p>\n<\/div>\n

\n

Replacing End-of-Life IBM85-Class Equipment<\/h3>\n

Existing Bloma IBM85 operators whose machines are approaching end of economic service life \u2014 whether due to escalating maintenance cost, declining spare parts availability, or simply machine age \u2014 will find the ZQ80 a technically defined replacement option with a higher clamping force (800 KN vs. 700 KN), larger injection weight (466 g vs. 310\/280 g), and smaller machine height (2 M vs. 2.55 M). The comparison is objective and quantitative, not qualitative.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Explore our complete injection blow molding machine replacement series \u2014 from compact 40 T platforms to heavy-duty 135 T industrial machines.<\/p>\n

All Replacement Models \u2192<\/a><\/p>\n<\/div>\n

<\/p>\n

\n

Peripheral Equipment \u2014 Integrated Line Supply<\/h2>\n

We supply the complete ancillary equipment needed to operate the ZQ80 injection blow molding machine as a fully integrated production system, reducing multi-vendor complexity and providing a single point of technical contact for the entire line.<\/p>\n

\n
\n

Oil-Free Air Compressor<\/h3>\n

The ZQ80 demands 0.7 M\u00b3\/min of clean, oil-free compressed air at 0.7\u20131.2 MPa for consistent container blowing across all active cavities. Across 20 cavities at 10 ml, any blow pressure variation manifests as container-to-container wall thickness variation that becomes visible in quality inspection. For pharmaceutical and food-grade production on the ZQ80, oil-free air supply is a regulatory requirement as well as a quality parameter \u2014 oil carry-over from conventional compressors constitutes a contamination event under INVIMA pharmaceutical packaging standards. Our recommended oil-free air compressors<\/a> are matched to the ZQ80’s air demand and pre-validated for pharmaceutical-grade clean air delivery.<\/p>\n

\"Oil-Free<\/p>\n<\/div>\n

\n

\u0645\u0648\u0644\u0688 \u0679\u0645\u067e\u0631\u06cc\u0686\u0631 \u06a9\u0646\u0679\u0631\u0648\u0644\u0631<\/h3>\n

On the ZQ80’s 800\u00d7400 mm platen running 20-cavity molds, maintaining uniform mold temperature across the full platen surface is the most critical process stability variable after shot weight. Uncontrolled cooling system temperature drift over a long production shift causes progressive cavity-to-cavity weight variation and surface quality degradation that may not be evident in early-shift quality checks but accumulates to an out-of-specification condition by the end of the shift. Our Mold Temperature Controllers regulate the ZQ80’s 4 M\u00b3\/h cooling circuit within \u00b11\u00b0C of setpoint under continuous load, preventing this thermal drift entirely. For pharmaceutical producers validating processes to ISO 15378 or INVIMA quality requirements, this temperature stability is part of the validated process, not an optional enhancement.<\/p>\n

\"Mold<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

About Us – Injection Blow Molding Machine Manufacturers<\/h2>\n

We design and manufacture a comprehensive range of injection blow molding machines<\/strong> \u2014 from compact 40 T platforms through heavy-duty 135 T industrial machines \u2014 all built on European-style closed-frame structural platforms with servo rotation drives and hydraulic double systems. The ZQ80 occupies the productive upper-mid range of this line, where 800 KN clamping and 20-cavity pharmaceutical vial production capability combine with a compact 4.5\u00d71.6\u00d72 M footprint that fits within standard Colombian industrial buildings.<\/p>\n

We position the ZQ80 as a technically specific option in the 80-ton IBM market, not as a universal solution. We encourage buyers to compare it against Bloma IBM85 and other available options using objective parameters. If the ZQ80’s specifications align with your requirements after that comparison, we are confident in the machine’s production performance.<\/p>\n

\u0648\u0631\u06a9 \u0634\u0627\u067e<\/h3>\n
\n
\"\u0648\u0631\u06a9\u0634\u0627\u067e
\n\"\u0648\u0631\u06a9\u0634\u0627\u067e
\n\"\u0648\u0631\u06a9\u0634\u0627\u067e
\n\"\u0648\u0631\u06a9\u0634\u0627\u067e<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

\u0627\u06a9\u062b\u0631 \u067e\u0648\u0686\u06be\u06d2 \u06af\u0626\u06d2 \u0633\u0648\u0627\u0644\u0627\u062a<\/h2>\n
\n
\nQ1. Where can Colombian pharmaceutical packaging producers get a supplier quote for the ZQ80 industrial injection blow molding machine?\u25bc<\/span><\/summary>\n

Contact us directly through our website with your container type, target volume range, resin specification, annual volume estimate, and facility location in Colombia. We provide Spanish-language quotations with machine configuration, cavitation estimates, utility specifications, DIAN tariff classification information, shipping schedule from dispatch to Colombian port, and commissioning plan including operator training.<\/p>\n<\/details>\n<\/div>\n

\n
\nQ2. How does the ZQ80 injection blow molding machine’s hydraulic double system work and why does it use less energy than standard IBM machines?\u25bc<\/span><\/summary>\n

The ZQ80 separates its clamping booster cylinder from the mold travel circuit into two independent hydraulic systems. The booster \u2014 which provides the final 800 KN lock-up force \u2014 activates only when the mold is fully closed and releases before opening begins. The mold opening and closing strokes operate on the lower-pressure mold travel circuit only. This means the dual 18.5+18.5 KW pump pair is driving the high-pressure booster for only the injection dwell portion of each 4-second cycle \u2014 not the full sequence. In a standard single-circuit machine, the clamping system maintains high pressure throughout the entire mold travel sequence. This architectural difference reduces average power demand by 20\u201330% over the full cycle.<\/p>\n<\/details>\n<\/div>\n

\n
\nQ3. Which injection blow molding machine parts should ZQ80 operators in Colombia stock locally to minimize production downtime?\u25bc<\/span><\/summary>\n

We recommend local stock of: screw tip and non-return valve assembly (highest frequency, every 1,500\u20133,000 hours depending on resin), barrel heater bands for each of the 4+N barrel zones, hydraulic seals for the injection clamping and blow clamping cylinders, servo rotation motor encoder cable and connector set, and turret bearing kit. We provide a complete recommended spare parts list at commissioning with our part numbers, and offer air freight dispatch to Colombia for critical items when local sourcing is unavailable. The ZQ80’s hydraulic double system design reduces seal cycling frequency compared to single-circuit machines, typically extending seal service intervals by 15\u201320%.<\/p>\n<\/details>\n<\/div>\n

\n
\nQ4. What is the best injection blow molding machine for producing 20-cavity pharmaceutical vials at 10 ml in a Colombian facility?\u25bc<\/span><\/summary>\n

The ZQ80 injection blow molding machine is specifically designed for exactly this application \u2014 20 cavities at 10 ml is its maximum documented cavitation at that volume. At 4-second dry cycle with production time added, a 20-cavity 10 ml line on the ZQ80 achieves high hourly throughput rates suitable for pharmaceutical manufacturers running two or three shifts. The 800 KN injection clamping force maintains cavity-to-cavity weight uniformity across all 20 cavities in the 800\u00d7400 mm platen, which is the critical quality parameter for INVIMA pharmaceutical batch documentation in Colombia. For facilities deciding between the ZQ80 (20 cavities at 10 ml) and the ZQ60 (14 cavities at 10 ml), the ZQ80 provides a 43% throughput increase at this specific container size and volume class.<\/p>\n<\/details>\n<\/div>\n

\n
\nQ5. How does the injection blow molding machine process compare to extrusion blow molding for personal care bottles in Latin America?\u25bc<\/span><\/summary>\n

In injection blow molding, the parison is injection-molded around a core rod \u2014 producing a preform with a precisely dimensioned neck that never has a parting line or flash. In extrusion blow molding, the extruded parison is pinched by the mold, creating a flash line at the pinch-off that must be trimmed. For personal care containers where neck thread dimensions determine closure compatibility and where surface flash is aesthetically unacceptable, the IBM process produces consistently better results. For Latin American cosmetic brands competing on packaging quality and shelf appeal, IBM containers on the ZQ80 eliminate the neck flash trimming loop and the associated flash-recycling process that adds cost and waste to EBM production.<\/p>\n

 <\/p>\n<\/details>\n<\/div>\n

\n
\nQ6. When should a Colombian container producer consider upgrading from the ZQ60 to the ZQ80 injection blow molding machine?\u25bc<\/span><\/summary>\n

The upgrade from ZQ60 to ZQ80 injection blow molding machine typically makes sense when: annual container demand at 10 ml consistently requires more than the ZQ60’s 14-cavity maximum output across available shift hours; when you need cavitation at 30 ml above 12 (ZQ80 provides 18); when your container portfolio has grown to include formats above 500 ml at more than 3 cavities (ZQ80 provides 5\u20136 at 500 ml); or when your total production volume has grown to the point where additional shift hours on the ZQ60 are no longer a viable alternative to adding capacity. The ZQ80 injection blow molding machine’s 43% cavitation increase at 10 ml over the ZQ60 is the most common single justification for this upgrade decision among Colombian pharmaceutical producers.<\/p>\n<\/details>\n<\/div>\n

\n
\nQ7. What injection blow molding machine tooling options are available for the ZQ80 800\u00d7400 mm platen for customers in Bogot\u00e1 or Medell\u00edn?\u25bc<\/span><\/summary>\n

We design and manufacture ZQ80-compatible injection blow molds through our in-house tooling division, with molds engineered to the ZQ80 platen mounting specification, core rod diameter and pitch tolerances, and blow station geometry. For customers in Bogot\u00e1, Medell\u00edn, or other Colombian cities, we recommend requesting machine and tooling quotes simultaneously so the tooling team can cross-reference cavitation count, container size, and neck finish requirements from the outset. If you have existing container drawings in STEP, IGES, or DXF format, we produce ZQ80 injection blow molding machine-compatible molds from those inputs without requiring re-qualification of the container from your customers \u2014 the mold transition produces the same container by a different means than any previous tooling.<\/p>\n<\/details>\n<\/div>\n<\/div>\n<\/div>\n

\u0627\u06cc\u0688\u06cc\u0679\u0631: PXY<\/p>","protected":false},"excerpt":{"rendered":"

The EP-ZQ80 is a European-style injection blow molding machine designed as a direct replacement for the Bloma IBM85. It features an 800 KN injection clamping force and a 120 KN blowing clamping force, with a total installed power of 55 KW. The machine produces seamless containers from 1 to 2000 ml and is equipped with a 55 mm screw, offering a substantial 466 g injection weight. Measuring 4.5 x 1.6 x 2 meters and weighing 10 tons, it has a dry cycle time of 4 seconds. Compared to the Bloma IBM85, it offers a 14% increase in clamping force, significantly greater injection capacity, and a more compact height, while reducing energy consumption by 20-30%.<\/p>","protected":false},"featured_media":638,"comment_status":"open","ping_status":"closed","template":"","meta":{"_et_pb_use_builder":"","_et_pb_old_content":"","_et_gb_content_width":""},"product_brand":[],"product_cat":[33],"product_tag":[],"class_list":["post-758","product","type-product","status-publish","has-post-thumbnail","product_cat-replacement-of-bloma","first","instock","shipping-taxable","product-type-simple"],"_links":{"self":[{"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/product\/758","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/types\/product"}],"replies":[{"embeddable":true,"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/comments?post=758"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/media\/638"}],"wp:attachment":[{"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/media?parent=758"}],"wp:term":[{"taxonomy":"product_brand","embeddable":true,"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/product_brand?post=758"},{"taxonomy":"product_cat","embeddable":true,"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/product_cat?post=758"},{"taxonomy":"product_tag","embeddable":true,"href":"https:\/\/onestepblowmachine.com\/ur\/wp-json\/wp\/v2\/product_tag?post=758"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}