{"id":1073,"date":"2026-08-26T02:46:42","date_gmt":"2026-08-26T02:46:42","guid":{"rendered":"https:\/\/onestepblowmachine.com\/?post_type=product&p=1073"},"modified":"2026-08-26T05:31:25","modified_gmt":"2026-08-26T05:31:25","slug":"ep-hga-es-2c200-edible-oil-bottle-handle-bottle-blow-molding-machine-5l","status":"publish","type":"product","link":"https:\/\/onestepblowmachine.com\/pl\/product\/ep-hga-es-2c200-edible-oil-bottle-handle-bottle-blow-molding-machine-5l\/","title":{"rendered":"EP-HGA.ES-2C200 Edible Oil Bottle & Handle Bottle Blow Molding Machine (5L)"},"content":{"rendered":"
\n
\n

EP-HGA.FS-2C200 Edible Oil Bottle & Handle Bottle Blow Molding Machine (5L)<\/h2>\n

The EP-HGA.FS-2C200 is a high-capacity, fully automatic blow molding machine developed specifically for large-format edible oil containers and handle bottles. Engineered to accommodate bottle volumes up to 5,000 ml \u2014 covering the 5-liter cooking oil containers dominant in retail and food-service channels across global markets \u2014 this two-step blow molding machine combines centralized heating with a distance-blowing mechanism that keeps wall-thickness distribution consistent even on oversized preforms. The machine addresses the structural demands of heavy oil bottles head-on: the 215 mm clamping stroke and 500 mm stretching stroke provide the axial reach needed for tall, large-diameter containers, while servo-driven clamping delivers repeatable precision across multi-shift production runs. Whether supplying edible oil brands in Colombia, Southeast Asia, or European food markets, the ES-2C200 delivers the output volume and container quality that mid-to-large bottling operations require from a purpose-built pet blow molding machine.<\/p>\n

With 2 cavities, a theoretical output of 1,600 bottles per hour, and a maximum container diameter of 180 mm, this bottle blow molding machine is the clear production step up from the ES-2C150, designed specifically for lines where 3-liter, 4-liter, and 5-liter formats make up the majority of the production schedule.<\/p>\n<\/div>\n

<\/p>\n

\n

Technical Specifications \u2014 HGA.FS-2C200 Bottle Blow Molding Machine<\/h2>\n

The table below lists all factory-specified parameters for the EP-HGA.FS-2C200 blow molding machine. These figures are drawn directly from the product specification sheet and should be used when engineering ancillary systems such as high-pressure air compressors, chillers, and mold temperature controllers for the installation.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Category<\/th>\nParametr<\/th>\nJednostka<\/th>\nHGA.FS-2C200 Bottle Blow Molding Machine<\/th>\n<\/tr>\n<\/thead>\n
Molding<\/td>\nClamping Stroke<\/td>\nmm<\/td>\n215<\/td>\n<\/tr>\n
Mold-open Distance<\/td>\nmm<\/td>\n499<\/td>\n<\/tr>\n
Mold-close Distance<\/td>\nmm<\/td>\n284<\/td>\n<\/tr>\n
Stretching Stroke<\/td>\nmm<\/td>\n500<\/td>\n<\/tr>\n
Mold-open Distance (Preform)<\/td>\nmm<\/td>\n50<\/td>\n<\/tr>\n
Mold-close Distance (Preform)<\/td>\nmm<\/td>\n200<\/td>\n<\/tr>\n
Preform Holder \/ Cavities<\/td>\n\u2014<\/td>\n50 \/ 2<\/td>\n<\/tr>\n
Container<\/td>\nMaksymalna obj\u0119to\u015b\u0107 pojemnika<\/td>\nml<\/td>\n5,000<\/td>\n<\/tr>\n
Neck Diameter Range<\/td>\nmm<\/td>\n138<\/td>\n<\/tr>\n
Max. Container Diameter<\/td>\nmm<\/td>\n180<\/td>\n<\/tr>\n
Max. Container Height<\/td>\nmm<\/td>\n350<\/td>\n<\/tr>\n
Theoretical Output<\/td>\nbph<\/td>\n1,600<\/td>\n<\/tr>\n
Electrical System<\/td>\nMax. Heating Power<\/td>\nkW<\/td>\n85<\/td>\n<\/tr>\n
Heating Power (Running)<\/td>\nkW<\/td>\n35<\/td>\n<\/tr>\n
Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n7<\/td>\n<\/tr>\n
Air System<\/td>\nLow Pressure Air Consumption<\/td>\nltr\/min<\/td>\n600<\/td>\n<\/tr>\n
Blowing Pressure<\/td>\nkg\/cm\u00b2<\/td>\n30<\/td>\n<\/tr>\n
High Pressure Air Consumption<\/td>\nltr\/min<\/td>\n6,000<\/td>\n<\/tr>\n
Cooling Water<\/td>\nOperating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n5\u20136<\/td>\n<\/tr>\n
Temperature<\/td>\n\u00b0C<\/td>\n8\u201312<\/td>\n<\/tr>\n
Flow Rate<\/td>\nltr\/min<\/td>\n91.4<\/td>\n<\/tr>\n
Machine<\/td>\nDimensions (L \u00d7 W \u00d7 H)<\/td>\nmm<\/td>\n4300 \u00d7 2100 \u00d7 2500<\/td>\n<\/tr>\n
Waga<\/td>\nkg<\/td>\n4,500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

\"onestepblowmachine-products-show11<\/p>\n

\n

Key Advantages of Bottle Blow Molding Machine<\/h2>\n

The engineering priorities behind this automatic pet blowing machine reflect the operational realities of large-format edible oil production \u2014 where container weight, fill-line compatibility, and retail shelf requirements leave little room for process variation. The six advantages below represent deliberate design decisions, each traceable to a measurable production outcome.<\/p>\n

\n
\n

5-Liter Container Capacity<\/h3>\n

With a maximum container volume of 5,000 ml, the ES-2C200 covers the full retail and food-service edible oil range \u2014 from 2-liter domestic formats to 5-liter bulk packs for restaurant supply. The 350 mm maximum container height and 180 mm body diameter are matched specifically to the tall, round cross-section of standard 5-liter cooking oil bottles distributed in Colombian and international supermarket chains.<\/p>\n<\/div>\n

\n

Long Stretching Stroke for Biaxial Orientation<\/h3>\n

The 500 mm stretching stroke provides the axial elongation required to achieve proper biaxial molecular orientation in 5-liter PET bottles. Without adequate stretch, large-volume containers develop stress-whitening and reduced impact resistance that cause failure during the drop-test protocols required by major food retailers. This blow molding machine’s stretch geometry eliminates that risk at rated output speed.<\/p>\n<\/div>\n

\n

High-Capacity Air System<\/h3>\n

Blowing large containers at volume requires proportionally more high-pressure air than smaller formats. At 6,000 ltr\/min high-pressure air consumption and 30 kg\/cm\u00b2 blowing pressure, the ES-2C200 is dimensioned for sustained output without pressure recovery delays between cycles. Compressor selection must be matched accordingly \u2014 an undersized air system is the most common bottleneck in large-format blow molding installations.<\/p>\n<\/div>\n

\n

Independent Oven Zone Control<\/h3>\n

The infrared oven is segmented into adjustable heating zones, each controlled independently from the PLC. For the heavy preforms used in 5-liter bottle production, zone-specific power percentages compensate for differential wall absorption across the preform body and neck transition zone. This control granularity prevents the material hot-spots that cause wall thinning on one side of an unsupported large-format bottle.<\/p>\n<\/div>\n

\n

Enhanced Cooling Water Circuit<\/h3>\n

The enlarged cooling water flow rate of 91.4 ltr\/min \u2014 more than three times the requirement of the smaller ES-2C150 \u2014 reflects the greater heat load of 5-liter mold cavities. A properly matched chiller maintaining 8\u201312\u00b0C water temperature at this flow rate is essential for stable cycle times and consistent post-blow bottle geometry before ejection to the take-out conveyor.<\/p>\n<\/div>\n

\n

PLC Multi-Format Recipe Storage<\/h3>\n

The fully automatic blow moulding machine stores up to 99 production recipes, enabling rapid format changeovers between 3-liter, 4-liter, and 5-liter bottle specifications within one shift. Operators call a stored recipe from the touch-screen panel, and the machine adjusts oven zone temperatures, stretch rod speed, pre-blow timing, and clamp force automatically, cutting changeover time to under 15 minutes for experienced operators.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Partner Brands<\/p>\n

With more than twenty years focused on blow molding machine research and development, our engineering and production teams have built deep expertise across all aspects of the design, manufacture, and commissioning of PET blow molding equipment. We have applied for and been granted numerous national patents and continuously advance our production systems. Our blow molding machines handle PET, PETG, PC, PCTG, and PP materials across cosmetics, water, edible oil, beverages, food packaging, pharmaceuticals, and baby-product applications. In the high-end cosmetics, food, and pharmaceutical segments especially, our equipment is recognized as a benchmark choice. Clients who trust our auto blowing machines include Yibao, Haitian, Luhua, Walch, Blue Moon, Proya, Libai, Est\u00e9e Lauder, Walmart, Da Senlin, and Shining Eye Drops.<\/p>\n

\"Partner<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

Edible Oil Bottle & Handle Bottle Blow Molding Machine<\/a><\/div>\n

<\/p>\n

\n

Mold Engineering<\/h2>\n

For a 5-liter edible oil bottle blow molding machine, mold quality is the single greatest determinant of bottle-to-bottle consistency. Both the preform injection mold and the blowing mold supplied for the ES-2C200 are engineered to tolerances and material grades that sustain dimensional accuracy across millions of production cycles \u2014 critical when supplying branded edible oil customers who set tight specification limits on container weight, height, and fill-level sight-lines.<\/p>\n

\n
\n

\"Preform<\/p>\n

Preform Injection Mold<\/h3>\n