{"id":999,"date":"2026-08-24T03:32:34","date_gmt":"2026-08-24T03:32:34","guid":{"rendered":"https:\/\/onestepblowmachine.com\/?post_type=product&p=999"},"modified":"2026-08-24T06:09:06","modified_gmt":"2026-08-24T06:09:06","slug":"ep-hga-es-4c100-water-beverage-bottle-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/onestepblowmachine.com\/it\/product\/ep-hga-es-4c100-water-beverage-bottle-blow-molding-machine\/","title":{"rendered":"EP-HGA.ES-4C100 Water & Beverage Bottle Blow Molding Machine"},"content":{"rendered":"
\n
\n

EP-HGA.ES-4C100 Water & Beverage Bottle Blow Molding Machine<\/h2>\n

The EP-HGA.ES-4C100 steps up from the two-cavity ES series to a four-cavity configuration, delivering a theoretical output of 4,600 bottles per hour on a single machine platform. Designed for mid-to-high volume water and beverage packaging lines, this blow molding machine<\/strong> is built around the proven two-stage blowing principle \u2014 preforms are loaded, infrared-conditioned, stretched, and blown in a fully automatic cycle that runs continuously with minimal operator intervention. Four cavities per cycle mean higher throughput per square metre of factory floor, lower energy cost per bottle, and faster return on capital for water bottling and beverage production operations across global markets including Colombia, Brazil, and wider Latin America. Whether you are expanding an existing line or setting up a new production site, the EP-HGA.ES-4C100 bottle blow molding machine<\/strong> delivers the output capacity and process consistency that volume-driven beverage packaging demands.<\/p>\n<\/div>\n

<\/p>\n

\"Four-Cavity<\/div>\n

<\/p>\n

\n

Technical Specifications \u2014 HGA.ES-4C100 Bottle Blow Molding Machine<\/h2>\n
\n\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Bottle Blow Molding Machine Parameter<\/th>\nUnit\u00e0<\/th>\nCategory<\/th>\nHGA.ES-4C100 Bottle Blow Molding Machine<\/th>\n<\/tr>\n<\/thead>\n
Clamping Stroke<\/td>\nmm<\/td>\nMolding<\/td>\n128<\/td>\n<\/tr>\n
Mold-Open Distance<\/td>\nmm<\/td>\nMolding<\/td>\n328<\/td>\n<\/tr>\n
Mold-Close Distance<\/td>\nmm<\/td>\nMolding<\/td>\n200<\/td>\n<\/tr>\n
Stretching Stroke<\/td>\nmm<\/td>\nMolding<\/td>\n400<\/td>\n<\/tr>\n
Mold-Open Distance (Bottom)<\/td>\nmm<\/td>\nMolding<\/td>\n50<\/td>\n<\/tr>\n
Bottle Mold-Close Distance<\/td>\nmm<\/td>\nMolding<\/td>\n100<\/td>\n<\/tr>\n
Preform Holder<\/td>\n\u2014<\/td>\nMolding<\/td>\n92<\/td>\n<\/tr>\n
Cavities<\/td>\n\u2014<\/td>\nMolding<\/td>\n4<\/td>\n<\/tr>\n
Volume massimo del contenitore<\/td>\nml<\/td>\nContainer<\/td>\n800<\/td>\n<\/tr>\n
Max. Neck Diameter Range<\/td>\nmm<\/td>\nContainer<\/td>\n68<\/td>\n<\/tr>\n
Max. Container Diameter<\/td>\nmm<\/td>\nContainer<\/td>\n80<\/td>\n<\/tr>\n
Max. Container Height<\/td>\nmm<\/td>\nContainer<\/td>\n250<\/td>\n<\/tr>\n
Theoretical Output<\/td>\nbph<\/td>\nContainer<\/td>\n4,600<\/td>\n<\/tr>\n
Max. Heating Power<\/td>\nkW<\/td>\nElectrical<\/td>\n62.5<\/td>\n<\/tr>\n
Normal Heating Power<\/td>\nkW<\/td>\nElectrical<\/td>\n21<\/td>\n<\/tr>\n
Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\nAir System<\/td>\n7<\/td>\n<\/tr>\n
Low Pressure Air Consumption<\/td>\nltr\/min<\/td>\nAir System<\/td>\n800<\/td>\n<\/tr>\n
Blowing Pressure<\/td>\nkg\/cm\u00b2<\/td>\nAir System<\/td>\n35<\/td>\n<\/tr>\n
High Pressure Air Consumption<\/td>\nltr\/min<\/td>\nAir System<\/td>\n4,000<\/td>\n<\/tr>\n
Cooling Water Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\nCooling<\/td>\n5\u20136<\/td>\n<\/tr>\n
Cooling Water Temperature<\/td>\n\u00b0C<\/td>\nCooling<\/td>\n8\u201312<\/td>\n<\/tr>\n
Cooling Water Flow Rate<\/td>\nltr\/min<\/td>\nCooling<\/td>\n30<\/td>\n<\/tr>\n
Dimensioni della macchina (L\u00d7P\u00d7A)<\/td>\nmm<\/td>\nMachine<\/td>\n5120\u00d72150\u00d72350<\/td>\n<\/tr>\n
Peso della macchina<\/td>\nkg<\/td>\nMachine<\/td>\n4,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

\"onestepblowmachine-<\/p>\n

\n

Key Advantages of This Four-Cavity Blow Molding Machine<\/h2>\n

Scaling from two to four cavities is not simply doubling the output \u2014 it changes how the entire production line is planned, staffed, and maintained. The EP-HGA.ES-4C100 Bottle Blow Molding Machine is designed to make that scaling practical: four high-precision blowing cavities running at 4,600 bph, matched to a 92-position preform heating carousel that maintains consistent temperature distribution across all active preform positions simultaneously. The platform uses the same fundamental mechanical and pneumatic architecture as the two-cavity ES models, which means technicians already familiar with the series can service and maintain a four-cavity machine without a steep retraining curve. The advantage cards below cover the core engineering differentiators of this automatic pet blowing machine<\/strong>.<\/p>\n

\n
\n
\u2699 Four-Cavity High Output<\/strong><\/div>\n

At 4,600 bph, this blow molding machine<\/strong> operates in the upper tier of mid-scale PET bottle production. Four simultaneous cavities maximise throughput while keeping the machine footprint \u2014 5120\u00d72150 mm \u2014 significantly more compact than two separate two-cavity lines would require.<\/p>\n<\/div>\n

\n
\u26a1 Extended Stretching Reach<\/strong><\/div>\n

The 400 mm stretching stroke \u2014 longer than the two-cavity ES models \u2014 ensures thorough axial PET orientation in containers up to 250 mm tall. Proper biaxial orientation is directly responsible for the clarity, wall strength, and CO\u2082 barrier performance of the finished bottle.<\/p>\n<\/div>\n

\n
\ud83d\udd25 92-Position Preform Carousel<\/strong><\/div>\n

The larger preform holder carousel \u2014 92 positions versus 60 in two-cavity models \u2014 provides sufficient dwell time in the infrared oven for heavier preforms without requiring reduced line speed, ensuring consistent temperature distribution across all four blowing cavity preforms simultaneously.<\/p>\n<\/div>\n

\n
\ud83d\udca8 High-Volume Air Circuit<\/strong><\/div>\n

Four cavities blowing simultaneously at 35 kg\/cm\u00b2 requires a substantially higher air volume \u2014 4,000 ltr\/min at high pressure \u2014 than two-cavity machines. The air distribution manifold is engineered for balanced pressure delivery across all four blow nozzles, eliminating cavity-to-cavity volume variation.<\/p>\n<\/div>\n

\n
\ud83c\udf21 Efficient Heating Architecture<\/strong><\/div>\n

Normal operating heating draw is 21 kW against a peak rated capacity of 62.5 kW. This ratio \u2014 under 34% of rated \u2014 illustrates the efficiency of the zone-controlled infrared system, which adjusts lamp power in real time based on preform temperature feedback rather than running at a fixed output level.<\/p>\n<\/div>\n

\n
\ud83d\udd04 Two-Step Flexibility<\/strong><\/div>\n

Come un two-step blow molding machine<\/strong>, the ES-4C100 allows preform procurement to be managed independently of blowing line scheduling. Producers can maintain a preform buffer, source from multiple suppliers, and adjust blowing output without being locked into a synchronised injection-blowing cycle.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Partner Brands<\/h3>\n

Our team brings more than twenty years of hands-on experience developing, manufacturing, and supporting blow molding machines<\/strong> across a broad range of packaging industries. We hold active patents in PET blowing machine design and process optimisation, and our production systems serve materials including PET, PETG, PC, PCTG, and PP. Applications span water, beverages, edible oil, cosmetics, food packaging, pharmaceuticals, and baby care. Trusted clients include Yibao, Haitian, Luhua, Walch, Blue Moon, Proya, Libai, Est\u00e9e Lauder, Walmart, Da Senlin, and Shining Eye Drops.<\/p>\n

\"Blow<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Bottle Blow Molding Machine Mold Engineering<\/h2>\n

At 4,600 bph, mold performance becomes a line-critical variable. A mold that loses dimensional stability at elevated cycle rates, or that requires frequent maintenance interventions, directly erodes the throughput advantage that a four-cavity blow molding machine<\/strong> is designed to deliver. Our preform injection molds and blowing molds are manufactured in-house to standards that match the machine’s operating intensity \u2014 correct material grades, verified heat treatment, and precision CNC machining throughout.<\/p>\n

\n
\n

Preform Injection Mold<\/h3>\n

\"Preform<\/p>\n