{"id":1048,"date":"2026-08-25T03:34:45","date_gmt":"2026-08-25T03:34:45","guid":{"rendered":"https:\/\/onestepblowmachine.com\/?post_type=product&p=1048"},"modified":"2026-08-25T03:34:45","modified_gmt":"2026-08-25T03:34:45","slug":"ep-hga-es-6c76-water-beverage-bottle-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/onestepblowmachine.com\/hi\/product\/ep-hga-es-6c76-water-beverage-bottle-blow-molding-machine\/","title":{"rendered":"EP-HGA.ES-6C76 Water & Beverage Bottle Blow Molding Machine"},"content":{"rendered":"
\n
\n

EP-HGA.ES-6C76 Water & Beverage Bottle Blow Molding Machine<\/h2>\n

The EP-HGA.ES-6C76 is a high-output, two-step blow molding machine purpose-built for mineral water, juice, tea, and carbonated beverage packaging lines. Engineered around a six-cavity configuration with a theoretical output of up to 7,200 bottles per hour, this automatic pet blowing machine is the preferred choice for mid-to-large bottling operations that demand consistent wall thickness, dimensional accuracy, and minimal downtime. Whether you are setting up a new production facility in Colombia, expanding a beverage filling line in Southeast Asia, or modernizing an existing plant in Europe, the ES-6C76 delivers the reliability and throughput a competitive market demands.<\/p>\n

As a fully automatic blow moulding machine, it integrates a PLC-driven control system, servo-assisted preform feeding, and an infrared preform heating oven into a compact footprint of 4,690 \u00d7 2,000 \u00d7 2,000 mm. This two stage blow molding machine separates preform conditioning from the bottle-blowing step, allowing operators to optimize each stage independently \u2014 a fundamental advantage of the two-step blow molding process that single-stage machines cannot match.<\/p>\n<\/div>\n

\n

Technical Specifications \u2014 HGA.ES-6C76<\/h2>\n

The following parameters apply to the standard ES-6C76 configuration. All values are factory-tested reference data; actual performance may vary slightly based on preform specification, ambient conditions, and bottle geometry.<\/p>\n

\n\n\n\n\n<\/colgroup>\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
\u092a\u0948\u0930\u093e\u092e\u0940\u091f\u0930<\/th>\n\u0907\u0915\u093e\u0908<\/th>\n\u0915\u0940\u092e\u0924<\/th>\n<\/tr>\n<\/thead>\n
Molding<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Clamping Stroke<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n100<\/td>\n<\/tr>\n
Mold-Open Distance<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n300<\/td>\n<\/tr>\n
Mold-Close Distance<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n200<\/td>\n<\/tr>\n
Stretching Stroke<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n350<\/td>\n<\/tr>\n
Preform Holder<\/td>\n\u2014<\/td>\n96<\/td>\n<\/tr>\n
\u0917\u0941\u0939\u093e\u0913\u0902 \u0915\u0940 \u0938\u0902\u0916\u094d\u092f\u093e<\/td>\n\u2014<\/td>\n6<\/td>\n<\/tr>\n
Container<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
\u0905\u0927\u093f\u0915\u0924\u092e \u0915\u0902\u091f\u0947\u0928\u0930 \u0935\u0949\u0932\u094d\u092f\u0942\u092e<\/td>\n\u090f\u092e\u090f\u0932<\/td>\n700<\/td>\n<\/tr>\n
Max. Neck Diameter Range<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n38<\/td>\n<\/tr>\n
Max. Container Diameter<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n68<\/td>\n<\/tr>\n
Max. Container Height<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n240<\/td>\n<\/tr>\n
Theoretical Output<\/td>\nbph<\/td>\n7,200<\/td>\n<\/tr>\n
Electrical System<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Max. Heating Power<\/td>\n\u0915\u093f\u0932\u094b\u0935\u093e\u091f<\/td>\n62.5<\/td>\n<\/tr>\n
Normal Heating Power<\/td>\n\u0915\u093f\u0932\u094b\u0935\u093e\u091f<\/td>\n26<\/td>\n<\/tr>\n
Air System<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n7<\/td>\n<\/tr>\n
Low Pressure Air Consumption<\/td>\nltr\/min<\/td>\n900<\/td>\n<\/tr>\n
Blowing Pressure<\/td>\nkg\/cm\u00b2<\/td>\n35<\/td>\n<\/tr>\n
High Pressure Air Consumption<\/td>\nltr\/min<\/td>\n5,800<\/td>\n<\/tr>\n
Cooling Water<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Operating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n5\u20136<\/td>\n<\/tr>\n
Water Temperature<\/td>\n\u0921\u093f\u0917\u094d\u0930\u0940 \u0938\u0947\u0932\u094d\u0938\u093f\u092f\u0938<\/td>\n8\u201312<\/td>\n<\/tr>\n
Flow Rate<\/td>\nltr\/min<\/td>\n40<\/td>\n<\/tr>\n
Machine<\/strong><\/td>\n<\/td>\n<\/td>\n<\/tr>\n
Machine Size (L\u00d7W\u00d7H)<\/td>\n\u092e\u093f\u092e\u0940<\/td>\n4690 \u00d7 2000 \u00d7 2000<\/td>\n<\/tr>\n
\u092e\u0936\u0940\u0928 \u0935\u091c\u0928<\/td>\nkg<\/td>\n6,500<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

 <\/p>\n

<\/p>\n

\"Blow<\/div>\n

<\/p>\n

\n

Key Product Highlights<\/h2>\n

The ES-6C76 was developed specifically for the water and beverage sector, where production uptime, bottle clarity, and label-panel consistency are non-negotiable. The machine supports PET containers from 100 ml to 700 ml, accommodating a neck diameter range of up to 38 mm and a maximum body diameter of 68 mm. The maximum container height reaches 240 mm, covering standard 330 ml, 500 ml, and 600 ml beverage formats as well as small mineral water bottles \u2014 all within the same mold setup, simply by changing the blowing mold inserts.<\/p>\n

Because this pet blow molding machine follows the two step blow molding workflow, preforms can be produced off-line or sourced from specialist preform manufacturers, giving buyers complete supply-chain flexibility. The infrared heating zone uses zoned temperature control to accommodate a wide variety of preform wall thicknesses, ensuring that every bottle meets the required axial and hoop strength before it leaves the blowing station. Compared with older bottle molding machine designs, the ES-6C76 reduces energy consumption per bottle through its variable-frequency drives and regenerative air-recovery circuits.<\/p>\n<\/div>\n

<\/p>\n

Water & Beverage Bottle Blow Molding Machine<\/a><\/div>\n

<\/p>\n

\n

Our Key Advantages<\/h2>\n

What separates this automatic pet blowing machine from comparable models on the market is not a single feature \u2014 it is the integration of every sub-system into one coherent, production-ready platform. The ES-6C76 uses a high-precision servo motor for the preform transport chain, reducing mechanical wear and cutting changeover time to under 30 minutes when switching between bottle formats. The heating oven is divided into independently controlled infrared zones, so operators can fine-tune the temperature profile for different preform wall distributions \u2014 an essential capability when running lightweight eco-preforms that are increasingly common in sustainable beverage packaging.<\/p>\n

The mold clamping unit uses a toggle-lever mechanism that delivers consistent clamping force across all six cavities simultaneously, eliminating the parting-line flash that plagues hydraulic-only designs. A built-in high-pressure air recovery system recaptures blow-pressure air from the previous cycle and redirects it for the pre-blow phase of the next, reducing compressor load and lowering per-bottle energy cost. For buyers in markets such as Colombia, Brazil, and the broader Latin American region \u2014 where energy tariffs and altitude affect compressor performance \u2014 this architecture provides a tangible operational advantage.<\/p>\n

\n
\n

\u26a1 Energy Efficiency<\/strong><\/p>\n

Variable-frequency drives and air recovery circuits cut per-bottle energy use significantly versus fixed-speed legacy machines.<\/p>\n<\/div>\n

\n

\ud83c\udfaf 6-Cavity Precision<\/strong><\/p>\n

Simultaneous blow of six cavities with servo-driven stretch rods ensures wall-thickness uniformity within \u00b10.05 mm across every bottle.<\/p>\n<\/div>\n

\n

\ud83d\udd04 Fast Format Change<\/strong><\/p>\n

Standardized mold-plate dimensions and quick-release clamps allow format changeover in under 30 minutes without specialist tooling.<\/p>\n<\/div>\n

\n

\ud83d\udce6 Broad Bottle Range<\/strong><\/p>\n

Handles volumes from 100 ml to 700 ml \u2014 water, juice, tea, CSD \u2014 within the same machine frame, maximizing equipment utilization.<\/p>\n<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Partner Brands<\/h2>\n

With over two decades of dedicated research and development, our engineering team has built extensive hands-on experience in the manufacture, commissioning, and long-term management of blow molding machine systems. We continuously refine our production processes and hold numerous national patents covering both mechanical innovation and control software. Our blow molding machine portfolio spans PET, PETG, PC, PCTG, and PP materials, serving cosmetics, mineral water, edible oil, beverages, food packaging, pharmaceuticals, and baby-care products \u2014 with a particularly strong track record in the high-end cosmetics and pharmaceutical sectors where dimensional tolerances are tightest. Clients who rely on our plastic blow molding machine solutions include Yibao, Haitian, Luhua, Walch, Blue Moon, Proya, Libai, Est\u00e9e Lauder, Walmart, Da Senlin, and Shining Eye Drops.<\/p>\n

\"Partner<\/div>\n<\/div>\n

<\/p>\n

\n

Mold Design & Engineering<\/h2>\n

The quality of a bottle blow molding machine is ultimately determined by its mold engineering. Every mold set supplied for the ES-6C76 is produced in-house with CNC machining centers and undergoes dimensional verification before shipment.<\/p>\n

\n

<\/p>\n

\n

Preform Injection Mold<\/h3>\n
\"Preform<\/div>\n