{"id":1156,"date":"2026-08-31T07:05:23","date_gmt":"2026-08-31T07:05:23","guid":{"rendered":"https:\/\/onestepblowmachine.com\/?post_type=product&p=1156"},"modified":"2026-08-31T07:39:40","modified_gmt":"2026-08-31T07:39:40","slug":"ep-hga-es-2c114-3-2-cavities-medicine-bottle-blow-molding-machine","status":"publish","type":"product","link":"https:\/\/onestepblowmachine.com\/fa\/product\/ep-hga-es-2c114-3-2-cavities-medicine-bottle-blow-molding-machine\/","title":{"rendered":"EP-HGA.ES-2C114.3 \u2014 2 Cavities Medicine Bottle Blow Molding Machine"},"content":{"rendered":"
\n
\n

EP-HGA.ES-2C114.3 \u2014 2 Cavities Medicine Bottle Blow Molding Machine<\/h2>\n

A high-capacity two stage blow molding machine<\/strong> engineered for large-format pharmaceutical containers. With a two-cavity configuration supporting bottles up to 1,000 ml and a wide-neck diameter range up to 88 mm, the HGA.ES-2C114.3 covers the full spectrum of solid-dose tablet jars, liquid medicine bottles, and bulk nutraceutical containers. Its fully automatic blow moulding machine<\/strong> architecture runs continuously at 2,000 bottles per hour \u2014 delivering the consistency that GMP-regulated facilities in Colombia, Australia, and the EU demand.<\/p>\n<\/div>\n

<\/p>\n

\n

Technical Specifications \u2014 HGA.ES-2C114.3 Blow Molding Machine<\/h2>\n

All data below applies to the HGA.ES-2C114.3 two-cavity model. Performance figures are measured under standard conditions using PET resin at nominal process settings.<\/p>\n

\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n\n
Category<\/th>\n\u067e\u0627\u0631\u0627\u0645\u062a\u0631<\/th>\n\u0648\u0627\u062d\u062f<\/th>\n\u0627\u0631\u0632\u0634<\/th>\n<\/tr>\n<\/thead>\n
Molding<\/strong><\/td>\nClamping Stroke<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n132<\/td>\n<\/tr>\n
Mold-Open Distance<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n312<\/td>\n<\/tr>\n
Mold-Close Distance<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n180<\/td>\n<\/tr>\n
Stretching Stroke<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n400<\/td>\n<\/tr>\n
Preform Mold-Open Distance<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n50<\/td>\n<\/tr>\n
Bottle Mold-Close Distance<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n114.3<\/td>\n<\/tr>\n
Preform Holder \/ Cavities<\/td>\n\u2014<\/td>\n60 \/ 2<\/td>\n<\/tr>\n
Container<\/strong><\/td>\n\u062d\u062f\u0627\u06a9\u062b\u0631 \u062d\u062c\u0645 \u0638\u0631\u0641<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0644\u06cc\u062a\u0631<\/td>\n1,000<\/td>\n<\/tr>\n
Max. Neck Diameter Range<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n88<\/td>\n<\/tr>\n
Max. Container Diameter<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n94<\/td>\n<\/tr>\n
Max. Container Height<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n250<\/td>\n<\/tr>\n
Output<\/strong><\/td>\nTheoretical Output<\/td>\nbph<\/td>\n2,000<\/td>\n<\/tr>\n
Electrical System<\/strong><\/td>\nMax. Heating Power<\/td>\n\u06a9\u06cc\u0644\u0648\u0648\u0627\u062a<\/td>\n50<\/td>\n<\/tr>\n
Steady Heating Power<\/td>\n\u06a9\u06cc\u0644\u0648\u0648\u0627\u062a<\/td>\n16<\/td>\n<\/tr>\n
Air System<\/strong><\/td>\nOperating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n7<\/td>\n<\/tr>\n
Low Pressure Air Consumption<\/td>\nltr\/min<\/td>\n600<\/td>\n<\/tr>\n
Blowing Pressure \/ High Pressure Air<\/td>\nkg\/cm\u00b2 \/ ltr\/min<\/td>\n35 \/ 1,000<\/td>\n<\/tr>\n
Cooling Water<\/strong><\/td>\nOperating Pressure<\/td>\nkg\/cm\u00b2<\/td>\n6<\/td>\n<\/tr>\n
Temperature<\/td>\n\u062f\u0631\u062c\u0647 \u0633\u0627\u0646\u062a\u06cc\u06af\u0631\u0627\u062f<\/td>\n8\u201312<\/td>\n<\/tr>\n
Flow Rate<\/td>\nltr\/min<\/td>\n30<\/td>\n<\/tr>\n
Machine<\/strong><\/td>\n\u0627\u0628\u0639\u0627\u062f \u062f\u0633\u062a\u06af\u0627\u0647 (\u0637\u0648\u0644\u00d7\u0639\u0631\u0636\u00d7\u0627\u0631\u062a\u0641\u0627\u0639)<\/td>\n\u0645\u06cc\u0644\u06cc\u200c\u0645\u062a\u0631<\/td>\n3220 \u00d7 1660 \u00d7 2010<\/td>\n<\/tr>\n
\u0648\u0632\u0646 \u062f\u0633\u062a\u06af\u0627\u0647<\/td>\nkg<\/td>\n3,000<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n<\/div>\n<\/div>\n

\"onestepblowmachine-products-show16<\/p>\n

\n

Key Advantages of This Blow Molding Machine<\/h2>\n
\n
\n

Wide-Neck Large-Volume Capability<\/h3>\n

The 88 mm maximum neck diameter and 1,000 ml volume ceiling are rare in the injection blow molding machine<\/strong> segment, where most machines cap out at narrower neck formats. This makes the HGA.ES-2C114.3 the correct choice for pharmaceutical tablet jars, supplement tubs, and wide-mouth dispensing bottles where the lid diameter is a primary design requirement rather than an afterthought.<\/p>\n<\/div>\n

\n

ES Series Servo Drive Architecture<\/h3>\n

The ES series replaces hydraulic clamping cylinders with precision servo-electric actuators throughout the clamping and transfer assembly. Servo drives provide repeatable positioning accuracy at every cycle, reduce energy draw during idle phases, and eliminate the contamination risk associated with hydraulic fluid in a pharmaceutical-grade environment. Running steady-state at just 16 kW versus a 50 kW installed capacity, the energy efficiency advantage over comparable hydraulic bottle molding machines<\/strong> is measurable within the first quarter of operation.<\/p>\n<\/div>\n

\n

Precise PET Biaxial Orientation<\/h3>\n

The 400 mm stretching stroke delivers the axial stretch ratio that PET and PETG resins need to achieve full biaxial orientation in large-format pharmaceutical bottles. Correct orientation improves top-load strength, barrier performance against moisture and oxygen, and drop resistance \u2014 all properties that regulators and pharmacists assess when approving a new pharmaceutical packaging format in regulated markets like Colombia and South Korea.<\/p>\n<\/div>\n

\n

Consistent Two-Stage Process Control<\/h3>\n

In a two step blow molding machine<\/strong> design, preforms are produced and conditioned separately from the blow station. This means the oven profile can be tuned independently for each preform geometry, and the stretch-blow parameters can be locked without chasing oven temperature drift \u2014 a chronic problem in single-stage machines operating in warm factory environments. For pharmaceutical producers in tropical climates running sites in Colombia or Brazil, this temperature independence is operationally significant.<\/p>\n<\/div>\n

\n

National-Patent Neck-Finish Technology<\/h3>\n

Like all machines in the HGA series, the ES-2C114.3 incorporates proprietary neck-finish tooling covered by registered national patents. The tooling geometry ensures that both the preform injection gate and the blow mold parting line land in positions that do not compromise container integrity at the neck sealing face \u2014 a critical quality point for child-resistant closures used on pharmaceutical tablet jars in markets worldwide.<\/p>\n<\/div>\n

\n

Compact Footprint for Dedicated Pharma Lines<\/h3>\n

At 3,220 \u00d7 1,660 \u00d7 2,010 mm and 3,000 kg, the machine fits within a standard pharmaceutical cleanroom bay without structural modifications. Its compact plan area allows two units to be installed side by side in a 7-metre-wide production hall \u2014 a layout many pharmaceutical CMOs in Australia and Europe use to double capacity while maintaining a single operator supervision point for both blow molding machine<\/strong> cells.<\/p>\n<\/div>\n<\/div>\n

<\/p>\n

\n

Partner Brands<\/h3>\n

Over two decades of focused engineering have given our team an unmatched understanding of what large-format pharmaceutical packaging lines actually need from a blow molding machine<\/strong>. We hold multiple national patents in blow-molding technology and continuously push the boundaries of what automatic PET bottle production can achieve. Our track record includes long-term supply relationships with globally recognized brands \u2014 Yibao, Haitian, Luhua, Walch, Blue Moon, Proya, Libai, Est\u00e9e Lauder, Walmart, Da Senlin, and Shining Eye Drops \u2014 companies whose packaging specifications leave no room for process variation.<\/p>\n

\"Partner<\/div>\n<\/div>\n<\/div>\n

<\/p>\n

\"Customer<\/div>\n

<\/p>\n

\n

Blow Molding Machine Mold System Overview<\/h2>\n

The HGA.ES-2C114.3 separates preform production from bottle blowing at the tooling level, which means each mold station can be specified and maintained independently. This structural feature is central to the two step blow molding<\/strong> philosophy: quality is built into both the preform and the blow cavity rather than relying on a single integrated mold assembly to achieve both simultaneously. Below are the key engineering points for each station.<\/p>\n

\n
\n

Preform Injection Mold<\/h3>\n

\"Preform<\/p>\n